Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Got the last major piece of filtration today! Time to hooking some stuff up!!!
Excuse my ignorance, but what is that?
So all major pieces are here except I need to build the ATS. Got the UV, skimmer and manifold pump!
Curious, is that a TMC 110 UV? If so, looks a bit different than mine.
Curious, is that a TMC 110 UV? If so, looks a bit different than mine.
Air is getting to the return pump. It can be due to plumbing angles, too much water rushing into the sump (flow controls come in handy in this case) or air from skimmer getting to return pump.So I have an air bubble issue. The 650 is full of air bubbles. I also have a second 125 display on Th endgame system with no bubbles nor are there bubbles down in the sump. So there is a source of bubble somewhere in the dedicated plumbing to the 650. I guess today I will go back under the house and look at the plumbing. Does anyone have any other ideas???
Slightly yes, Keep tweaking flow until it calms down or appears to stopNo on the rfg’s. I can’t imagine plumbing angles being the issue. There are five 90’s over 25 or so feet. As far as water flow too fast in the sump this is a real possibility. Should I just slow down the flow up to the display?