- Joined
- Oct 6, 2015
- Messages
- 899
- Reaction score
- 1,269
No bug. Read Manual. Unit needs one fresh value. Then it Will send correct to bnc.Can't even send @JonasRoman a PM. Crazy.
Anyone else ever have an issue with the pH output not working? I had a power outage earlier today right in the middle of the Alkatronic running a test. After power came back, it output 7.0 to ph so I tried to run a manual test to reset it. The test wouldn’t run saying ‘please again cal’. So I calibrated both A and C and D, and it still wouldn’t run the test, same error message. So I power cycled it and ran calibration again. This time I also ran a bnc calibration and the apex saw both 7 and 10, so the communication works. I have ran 4 manual tests and it still shows 7 at the apex. Multiple reboots. Also after bnc calibration it was stuck at 10 until I rebooted it. I even tried a manual test and it stayed at 10 until I rebooted it. Then it went back to 7