have they set a date? I dont have an apex so that is why i went this way.
No date to speak of. Just the ones they have missed
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
have they set a date? I dont have an apex so that is why i went this way.
I will probably make a video on how to set it up when mine arrives.Just download the manual last nite(Singapore Time).
And also the app.
Also register my set.
The manual is thick. It is going to take me sometime to digest
I will probably make a video on how to set it up when mine arrives.
In the manual Pg.10, it say enter Mac address of the included socket.
Where to get this Mac address?
Yay!! @JonasRoman for labeling the pumps!!My Alkatronic
Yay!! @JonasRoman for labeling the pumps!!
The manual is pretty conclusive. It's quite easy. Basically you need to prime all of the hoses, calibrate everything, and then start running tests.Is there any video on the Alkatronic setup?(Where they show us step by step)
And any link on Facebook ?(Discussion group)
Thank You
OK. For a start I connect the power adaptor for the Alkatronic to my wall socket direct ? Or to The little wall socket adapter that come with the Alkatronic package?The manual is pretty conclusive. It's quite easy. Basically you need to prime all of the hoses, calibrate everything, and then start running tests.
Well, I’d say to read the manual. The power socket it comes with it for controlling an external device’s power depending on the alkalinity measurement. I.e. you’d plug your calcium reactor pump or solenoid into it, or your doser, etc. The Alkatronic should get plugged directly into the wall.
What kind of CaRX do you have installed Mark?I actually use my alk level to turn the CO2 on and off on the carx
For what it's worth, I like to keep the feed pump running just to keep water moving through the carx. Controlling the solenoid has worked out pretty well fwiw