my upgrade journal/journey

ok got everyone off to school! thanks @ tharbin, but i think i have everything i need. i had bought stuff to keep on hand. i just need help figuring out how to do it! the tank is 180 with a huge sump. what causes bjd? does it just hit torches?
 
ok got everyone off to school! thanks @ tharbin, but i think i have everything i need. i had bought stuff to keep on hand. i just need help figuring out how to do it! the tank is 180 with a huge sump. what causes bjd? does it just hit torches?
No, it’s bacterial and will take out other lps. I will post how I dose, I’ve done it 2-3 times with no issues.
IMG_5926.png
 
ok got everyone off to school! thanks @ tharbin, but i think i have everything i need. i had bought stuff to keep on hand. i just need help figuring out how to do it! the tank is 180 with a huge sump. what causes bjd? does it just hit torches?
What Kevin said.

I usually figure volume for a display tank at 80% of quoted size and 50% for the average sump. I've measured a half dozen or so tanks I've set up and the actual display volume always comes out around 75-85% of nominal (which is always overstated because it uses outside dimension). So I would figure a 180 to be about 144 gallons and a 100 sump to be around 50 gallons although sumps can vary widely based on equipment and type.

There is an alternate method of Cipro treatment that uses less Cipro but it is used daily and is harder to calculate. I suspect that the method Kevin uses is more likely to succeed.

I've never read that they have figured out yet what causes BJD but it is bacterial and can affect most LPS corals. Euphyllia and previously classified as such (torches, bubbles, grapes, hammers frogspawn, octospawn) are especially susceptible to infection.
 
Jill,

I calculated both for the dosage, although my sump is part of the main tank (AIO) and I did turn off my skimmer.

Here is a thread, with way too much info, on some of the original thought behind using Cipro for BJD. It uses the other dosing method with the idea to use just enough to knock out the BJD with minimal impact to other bacteria in the tank. I think Kevin's method is just fine and much easier.

https://www.reef2reef.com/threads/e...ic-treatments-for-brown-jelly-disease.782438/
 
I took out carbon and shut off the skimmer.
I should have added that I did not have any carbon in the filtration either. I only run carbon once in a while when I feel the water is getting 'dingy'.
 
I calculated my old 125 + sump was 100 gallons of water almost exactly but I had a lot of rock and almost 120 pounds of sand - maybe closer to 150 pounds.
 
so when can i relax? how do i know if i got it all killed?
In the next couple of days you should see things turning around if you acted quick enough. If not it will prevent it from spreading to your healthy euphyllia.
 
well lost the rest of the head on that torch now. its covered in brown slime. do i pull it again and clean and dip it? or will the cipro do its thing?
Suck up as much as you can with a turkey baster.
 

TOP 10 Trending Threads

WHAT MOST EARNS A REEFING BUSINESS YOUR "BEST OF THE BEST" NOMINATION?

  • Excellent livestock or product quality

    Votes: 1 12.5%
  • Honest listings and accurate expectations

    Votes: 0 0.0%
  • Helpful, knowledgeable customer service

    Votes: 1 12.5%
  • Standing behind a product when something goes wrong

    Votes: 3 37.5%
  • Fair prices and good value

    Votes: 2 25.0%
  • A unique selection or innovative products

    Votes: 0 0.0%
  • Supporting the reefing community or sustainability

    Votes: 0 0.0%
  • Consistent quality over time

    Votes: 1 12.5%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new