Nauti Tank 75g Build

Unless you have a certain wrasse who kills and eats every one introduced to tank…:(
I do have a wrasse that I suspect is eating my conchs, it could be the hermit crab also. Not really sure as I have not seen it happen. Also I have put 6 shrimp in the tank and cant tell how many are there still but I can tell at least 3-4. They are good hiders.
 
Ok, time for an update I suppose its been a while due to spending more time with the fam and some personal stuff going on and I have only done daily dosing and feeding and about weekly glass cleaning. Obviously I kept the ATO up and emptied the skimmer cup as well.

All in all the tank is doing pretty good but I have had some casualties due to neglect including a black clam (cause unknown, it had PMD for quite some time but I was too stuck in my own muck be bothered to do anything about it, things are certainly doing better now though), my rasta zoas were killed my the purple pavona which I saw coming and did nothing about, nearly lost the scrambled eggs zoas to the same and my holy grail micromussa lord somehow was buried in the sand for a few weeks (this one I did try to do something about, I dug around in the area that it was lost for about 30 minutes one day, to no avail) then about a week later it mysteriously reappeared right where I left it, colors are definitely a bit muted, I have fed and re-mounted it since.

My refugium is also doing odd things, the cheato and dragons breath in there has started to decompose I think due to not enough flow and it stinks. I originally thought it was my skimmer cup but I put a DIY carbon filter on top of it and the stink is still there so further thinking and investigation led me to the obvious of the decomposing life in the fuge… I will add more flow and pull some of the backup macro from one of the fish holding tanks to try it again.

The final piece of my battery backup that I should have put up a long time ago so I wouldn't have to use a suitcase generator when power goes out arrived a couple days ago. I will need to build a shelf in the stand for it to sit on though. I also still need to build the doors to the stand… ADHD is a… family friendly site…. Distraction… yeah that’s the word I was gonna say the whole time…
IMG_0042.jpeg


Full tank shots and other pictures of things described above.
IMG_0045.jpeg
IMG_0046.jpeg
IMG_0047.jpeg
IMG_0048.jpeg
 
I forgot to mention that there are a few shipments inbound:
-fish (cant ruin the surprise)
-invert and a few corals from TSA
-another dalua powerhead and backup return pump that seems to be lost in the mail 🤷‍♂️

Next thing to buy will either be a hydros controller or some supplemental light bars for the front and back to minimize shadowing, probably quanta helix
 
I forgot to mention that there are a few shipments inbound:
-fish (cant ruin the surprise)
-invert and a few corals from TSA
-another dalua powerhead and backup return pump that seems to be lost in the mail 🤷‍♂️

Next thing to buy will either be a hydros controller or some supplemental light bars for the front and back to minimize shadowing, probably quanta helix
I'm likely going to be replacing my supplemental T5's with light bars soon(ish).
 
Ok, time for an update I suppose its been a while due to spending more time with the fam and some personal stuff going on and I have only done daily dosing and feeding and about weekly glass cleaning. Obviously I kept the ATO up and emptied the skimmer cup as well.

All in all the tank is doing pretty good but I have had some casualties due to neglect including a black clam (cause unknown, it had PMD for quite some time but I was too stuck in my own muck be bothered to do anything about it, things are certainly doing better now though), my rasta zoas were killed my the purple pavona which I saw coming and did nothing about, nearly lost the scrambled eggs zoas to the same and my holy grail micromussa lord somehow was buried in the sand for a few weeks (this one I did try to do something about, I dug around in the area that it was lost for about 30 minutes one day, to no avail) then about a week later it mysteriously reappeared right where I left it, colors are definitely a bit muted, I have fed and re-mounted it since.

My refugium is also doing odd things, the cheato and dragons breath in there has started to decompose I think due to not enough flow and it stinks. I originally thought it was my skimmer cup but I put a DIY carbon filter on top of it and the stink is still there so further thinking and investigation led me to the obvious of the decomposing life in the fuge… I will add more flow and pull some of the backup macro from one of the fish holding tanks to try it again.

The final piece of my battery backup that I should have put up a long time ago so I wouldn't have to use a suitcase generator when power goes out arrived a couple days ago. I will need to build a shelf in the stand for it to sit on though. I also still need to build the doors to the stand… ADHD is a… family friendly site…. Distraction… yeah that’s the word I was gonna say the whole time…
IMG_0042.jpeg


Full tank shots and other pictures of things described above.
IMG_0045.jpeg
IMG_0046.jpeg
IMG_0047.jpeg
IMG_0048.jpeg
Looking great!
 
What brand are you thinking?
I'm starting to plan the 10', and will need to invest a significant amount of the budget into lighting, so don't want to spend a lot now. So, I'm thinking four (4) 33" of the Chinese variety on eBay for the time being.

You have any experience working with extruded aluminum? I'm gonna try my hand at DIY'ing a custom light rig for all of the fixtures, but have never worked with it before.
 
I'm starting to plan the 10', and will need to invest a significant amount of the budget into lighting, so don't want to spend a lot now. So, I'm thinking four (4) 33" of the Chinese variety on eBay for the time being.

You have any experience working with extruded aluminum? I'm gonna try my hand at DIY'ing a custom light rig for all of the fixtures, but have never worked with it before.
Aluminum is pretty easy, wear safety glasses and gloves for the burrs and use hardwood blades when you cut. Cut slow and with a good saw it should look and feel pretty clean after you knock the burrs down with fine file and sandpaper. It drills pretty easy too, just use a punch to start the hole so the bit doesn’t try to walk away, a drill press or even one of those hand held things are best if you have one.
 
Aluminum is pretty easy, wear safety glasses and gloves for the burrs and use hardwood blades when you cut. Cut slow and with a good saw it should look and feel pretty clean after you knock the burrs down with fine file and sandpaper. It drills pretty easy too, just use a punch to start the hole so the bit doesn’t try to walk away, a drill press or even one of those hand held things are best if you have one.
Cool, cool. I have all of the tools (DeWalt), save for a drill press (for now). I saw a cool jig made specially for 8020, though.
 
Anyway, sorry. I didn't mean to hijack, bud. When I do upgrade, I'm like 90% certain that I'll be going with Quanta bars.
Pff, get outta here with that hijack stuff. I wouldn't worry too much about the drill press its not too bad.
 
This past weekend I got the battery backup with 2x 200AH powerqueen LiFePo4 batteries for the return pump and a power station for the heaters so I can have automatic backup and not have to haul the generator over with an extension cord going out the door.

Before:
IMG_0078.jpeg


After:
IMG_0137.jpeg


I do still need to make some jumpers to parallel the batteries together because I dint think about that. They have both been charged separately so when I do parallel they will have already been equalized. Todd with Puddle Aquatics was a huge help with the setup, hopefully I wasn't too annoying Todd.
https://puddleaquatics.com/products/the-reefboxx-complete-bundle-pack-12-24-volt
1,024Wh Power station I used
Amazon product ASIN B0FN7MSY4L

Now for the fun stuff!
NEW AAARRRRIIVVAALLS!!!

Mccoskers flasher and exquisite firefish
IMG_0128.jpeg

Yellow eye spotted kole tang
IMG_0134.jpeg

And Mr. Hidey pants one spot foxface hiding behind the heater. The first one I had did this for a day or so also (about 10 years ago). I’ll get a better picture eventually.
IMG_0136.jpeg


And one casualty DOA (carpenters flasher)
IMG_0127.jpeg
IMG_0125.jpeg
 
He's out and about
IMG_0139.jpeg
IMG_0138.jpeg


The holding tanks stay au natural, I feel like the algae gives it a natural look and helps the fish acclimate for their 2+ week observation period… or its just my excuse to do less 🤷‍♂️
Gives the herbivores snack time too!
 
This past weekend I got the battery backup with 2x 200AH powerqueen LiFePo4 batteries for the return pump and a power station for the heaters so I can have automatic backup and not have to haul the generator over with an extension cord going out the door.

Before:
IMG_0078.jpeg


After:
IMG_0137.jpeg


I do still need to make some jumpers to parallel the batteries together because I dint think about that. They have both been charged separately so when I do parallel they will have already been equalized. Todd with Puddle Aquatics was a huge help with the setup, hopefully I wasn't too annoying Todd.
https://puddleaquatics.com/products/the-reefboxx-complete-bundle-pack-12-24-volt
1,024Wh Power station I used
Amazon product ASIN B0FN7MSY4L

Now for the fun stuff!
NEW AAARRRRIIVVAALLS!!!

Mccoskers flasher and exquisite firefish
IMG_0128.jpeg

Yellow eye spotted kole tang
IMG_0134.jpeg

And Mr. Hidey pants one spot foxface hiding behind the heater. The first one I had did this for a day or so also (about 10 years ago). I’ll get a better picture eventually.
IMG_0136.jpeg


And one casualty DOA (carpenters flasher)
IMG_0127.jpeg
IMG_0125.jpeg
I forgot to mention the tang only made it about 4 days. He came in SUPER skinny/sunken belly and didnt want to eat anything. I tried frozen, algae clips, seceral kinds of pellets, there was planty of hair algae in there with pods and amphipods.

I uave re-ordered and asked that rhey keep it in holding for a little extra time to not have a sunken belly by the time they ship.
 
I made this yesterday when my wife was doing a school project for her college anatomy class. I bet you cant tell which one I made and which one the wife made 0.o
IMG_0257.jpeg
You made the ramen and your wife made the fish?
 

TOP 10 Trending Threads

WHAT’S USUALLY THE FIRST CLUE THAT SOMETHING IS OFF IN YOUR REEF?

  • A fish’s behavior or appetite changes

    Votes: 10 14.5%
  • A coral looks different or stops opening normally

    Votes: 43 62.3%
  • Water clarity or surface appearance changes

    Votes: 10 14.5%
  • Equipment sounds or flow seem different

    Votes: 7 10.1%
  • A test result catches my attention

    Votes: 14 20.3%
  • Algae or other growth starts changing

    Votes: 14 20.3%
  • I usually notice when the problem is already obvious

    Votes: 3 4.3%
  • It depends on what’s going on

    Votes: 13 18.8%
  • Other (Post in the comments)

    Votes: 1 1.4%
Back
Top
Home
Post thread…
Market
What's new