I have the varios on my skimmer its a great pump really the only reason I would like the cor is one cord I cant stand more cords than I need and all the controller boxes
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
If anyone can post details for those of us that can't watch the video yet, that would be great.
If anyone can post details for those of us that can't watch the video yet, that would be great.
Wow! Thanks!
Still no release date yet?
Most DC pumps in this flow range can only step down at about 10-15% intervals and only down to about 40%, from watching the video it sounds like this one can take steps at about 6% all the way down to zero, is that accurate?0-100% Control
Anyone know the min flow with the cor 20. I preordered the cor 15 as I have a small tank (I'm building the sump to just swap out the DT in the near future). I'm looking for about 300-400 gph at no head. I have a manifold with an unused 1/2" output that can be used to regulate flow down if needed.
I figure with the cor 15 that's about 20-30% which should be doable (may have to open the manifold valve a little if it can't get lower than 40% like a lot of DC Pumps.
If the cor 20 goes low enough I would go that route since I plan on plumbing a couple reactors and a frag tank into the return pump so have room to grow would be nice.
Thanks Len
Most DC pumps in this flow range can only step down at about 10-15% intervals and only down to about 40%, from watching the video it sounds like this one can take steps at about 6% all the way down to zero, is that accurate?
The lights on the local control box look like the have a couple different colors for each LED so that 8 lights with 2 levels/colors = about 16 levels which would match the "6%" stepping he mentions in the video.