New 2 Chamber BRS Reactor Leaking

arcos · Apr 8, 2018

I just setup this Reactor and its leaking from the screws on top. I took the chambers off and reseated them and it still leaks from those fittings. What can be the cause of this? All of the hoses were cut cleanly.

andyg1960 · Apr 8, 2018

Leaked a bit when I first got it and I found that the O ring was not seated properly. Did you check that carefully when you threaded on the canisters? I don't know why it would leak from the screws unless the canister wasn't seated correctly and it was forcing the water upward

hafer12 · Apr 8, 2018

+1 canister o-rings, if not, I would contact brs

arcos · Apr 8, 2018

I just sent an email to BRS. I'll let you know what they say.

VelocityTech · Apr 8, 2018

+2 on o rings. Same thing happens to me often if not seated correctly.

shred5 · Apr 8, 2018

It is leaking from the screws on top, I dont think that has to do with the o-ring.

arcos · Apr 9, 2018

This stinks.. Brand New out of the box.

hafer12 · Apr 9, 2018

The hoses were cut cleanly? ? ?I don' think those nylon screws that hold the canisters to the wall Bracket penetrate into the wet area of the canister

arcos · Apr 9, 2018

I used a PVC cutting tool .

arcos · Apr 9, 2018

Here we go. Found the issue. The hole looks like it was drilled to deep from the factory. So the Nylon screws to penetrate the main chamber

hafer12 · Apr 9, 2018

I think a couple dabs of silicone might fix that, or have brs send u a new one if u can wait

shred5 · Apr 9, 2018

I would have them send you a new one.. Wow though..

Zack@BRS · Apr 9, 2018

arcos said:
I just setup this Reactor and its leaking from the screws on top. I took the chambers off and reseated them and it still leaks from those fittings. What can be the cause of this? All of the hoses were cut cleanly.

Good catch, and definitely sorry about that! We'll absolutely take care of that for you if we haven't already. If you have reached out to our customer service, they should get that replaced no problem.