New 80g system

[jhuntstl]

Got a 9415. Mine is probably sitting in 7". Gonna have to try that 4.5". I never really mess with it, which is why I love it so much.

 

[X-37B]

Still hazy when I upload not sure why. Much brighter in person.

 

[NowGlazeIT]

Still hazy when I upload not sure why. Much brighter in person.

You’ll get the hang of it! Ima laugh if it’s a fingerprint on your lens tho

 

[X-37B]

You’ll get the hang of it! Ima laugh if it’s a fingerprint on your lens tho

Funny as I checked all the lens and 1 was hazy.

 

[NowGlazeIT]

Funny as I checked all the lens and 1 was hazy.

Skaboosh:face-with-tears-of-joy:

 

[jhuntstl]

Do you pinch your air line at all? What do you find best at 4.5"?

I get a very wet, but very dark skimate at 7". If if it gets too full, my basement starts to smell like a wet fart. I have to take the collection cup outside and hose it off. Not worth cleaning it inside haha.

 

[NowGlazeIT]

Do you pinch your air line at all? What do you find best at 4.5"?

I get a very wet, but very dark skimate at 7". If if it gets too full, my basement starts to smell like a wet fart. I have to take the collection cup outside and hose it off. Not worth cleaning it inside haha.

Hahaha smells like what!?

 

[jhuntstl]

Hahaha smells like what!?

Go grab a 6-12 pack of a nice IPA. Stop by Chipotle. Chinese is acceptable too.

We'll review tomorrow.

 

[X-37B]

Do you pinch your air line at all? What do you find best at 4.5"?

I get a very wet, but very dark skimate at 7". If if it gets too full, my basement starts to smell like a wet fart. I have to take the collection cup outside and hose it off. Not worth cleaning it inside haha.

Mine is the 9430dc so it allows me to run the pump at 50-75%.
On your 9415 it will allow you to run more air which will allow you to get even darker skim and twice as much per day if you want.
On mine at 6" depth I could only run 10% and got about 300ml of skim every 4-5 days. At 4.5" depth I can pull 300ml a day running the pump/air at a higher rate.

 

[jhuntstl]

Mine is the 9430dc so it allows me to run the pump at 50-75%.
On your 9415 it will allow you to run more air which will allow you to get even darker skim and twice as much per day if you want.
On mine at 6" depth I could only run 10% and got about 300ml of skim every 4-5 days. At 4.5" depth I can pull 300ml a day running the pump/air at a higher rate.

Ahhh gotcha. Didn't realize you had DC. That changes things. I run a shallow sump, which is why I went with the Tunze. I never really considered playing around with it'd depth, but I might as well experiment a little. Mine fills up in about 5-7 days.

Edit: forgot to mention it's off daily from 6-11am

 

[NowGlazeIT]

Looks dark and chunky your doing something right

 

[jhuntstl]

Looks dark and chunky your doing something right

I would describe it as wet farty.

 

[X-37B]

I am running the Radion on the Radiance setting at 60% peak.
I like the look but not very bright.
I removed a couple stags to the frag system. They were browning and I think 100/100 was to strong.
I have one 16 hd also running and it helps brighten up the look.
Pic 1 Radion only.
Pic 2 both.

 

[X-37B]

My Xr15 blue with mount will be here this week.
I will be running 2 Xr15's and 2 16hd's on this system.
In the above pic you can see where the 16's light line stretches into the other side. Should get nice crossover with the other 16 going the other way. This should negate a shadow from the center support.
Also have 2 white light shades comming this week for the 15's. I picked white to offset all the black on my system.
The glare was annoying sitting on the couch. The 16's do not have alot of glare.
After all my lights are up and running I am going to borrow my friends par meter to get them dialed in.
Next on puchase list is;
Par meter
Gryphon saw

 

[NowGlazeIT]

My Xr15 blue with mount will be here this week.
I will be running 2 Xr15's and 2 16hd's on this system.
In the above pic you can see where the 16's light line stretches into the other side. Should get nice crossover with the other 16 going the other way. This should negate a shadow from the center support.
Also have 2 white light shades comming this week for the 15's. I picked white to offset all the black on my system.
The glare was annoying sitting on the couch. The 16's do not have alot of glare.
After all my lights are up and running I am going to borrow my friends par meter to get them dialed in.
Next on puchase list is;
Par meter
Gryphon saw

I also want that saw, looks great for wet cuts. I bought a nice dremel to see if that will fill the void till I can budget for the saw.

 

[X-37B]

I also want that saw, looks great for wet cuts. I bought a nice dremel to see if that will fill the void till I can budget for the saw.

I have looked at other cheaper ones but this one is a much better option. Whats another $500 anyway, lol.

 

[A Young Reefer]

following

 

[NowGlazeIT]

I have looked at other cheaper ones but this one is a much better option. Whats another $500 anyway, lol.

Better to spend money on the right tool then waste money on trying other ones right!

 

[X-37B]

Tanks a month 2 days and already starting to show coralline on the bottom.

 

[X-37B]

Ok so I have all lights mounted. Still working on cord management.
Now the second xr comes on but wont factory reset to pair up. Any ideas? I will be working on that today as it was late last night.