New Reefer

[jmanzella]

I’m fairly new back in the hobby. I bought a used RedSeaMax 250. I am not using the top of the unit as it produced way to much heat. I bought 2 used radion gen2 xr30’s. I have them dispensed from the ceiling and they are 9 in above the water. I bought a reef link reef to control the lights. I also built a screen top i bought from BRS. I was not pleased with the backfiltration so I added a sump. I am using both for filtration and to accommodate my probes and heater in the back unit. I have my protein skimmer in the sump. and i’m using. 4” sock. I’m running a 2k icecap hydro gyre with its own controller running at 65% flow. My ATO is Tunze controller and pump. I just installed Neptune Apex and I think I hooked it up correctly. I’m wondering why my ORP probe is reading 171 only. Any responses will be greatly appreciated. Thanks Reefers Jeff.

 

[Peace River]

Welcome to Reef2Reef!!!

 

[shadow_k]

Welcome to reef2reef ! Sorry I don’t have an apex but I’ll leave that question to someone who does !

 

[sp1187]

welcome to the show. :cool:

 

[bnord]

Appears to me that with the amount of resourcefulness that you have already displayed you’re going to be a huge success at this,
welcome and I think you’ll find all the support you need to get through the troubles you will certainly have ahead of you
reef long and prosper

 

[Ippyroy]

Welcome to R2R!

 

[vetteguy53081]

 

[thatone08]

Welcome!

 

[BroccoliFarmer]

Welcome to the R2R community!!

 

[Fred2482]

Welcome! For ORP, check this out: https://www.reef2reef.com/threads/orp.350715/

 

[FLReefer101]

Welcome to R2R!

 

[Supa]

I’m fairly new back in the hobby. I bought a used RedSeaMax 250. I am not using the top of the unit as it produced way to much heat. I bought 2 used radion gen2 xr30’s. I have them dispensed from the ceiling and they are 9 in above the water. I bought a reef link reef to control the lights. I also built a screen top i bought from BRS. I was not pleased with the backfiltration so I added a sump. I am using both for filtration and to accommodate my probes and heater in the back unit. I have my protein skimmer in the sump. and i’m using. 4” sock. I’m running a 2k icecap hydro gyre with its own controller running at 65% flow. My ATO is Tunze controller and pump. I just installed Neptune Apex and I think I hooked it up correctly. I’m wondering why my ORP probe is reading 171 only. Any responses will be greatly appreciated. Thanks Reefers Jeff.

Welcome! I started the same tank not long ago, it’s a nice tank

 

[PeterC99]

Welcome to R2R!

Did you take the cap off the ORP probe?

 

[Poof No Eyebrows]

Welcome

 

[Schraufabagel]

 

[KWT]

Welcome to R2R, come in sit down and relax, enjoy

 

[Just John]

Glad you're here Jeff!

 

[jmanzella]

Welcome to R2R!

Did you take the cap off the ORP probe?

not at first I found out after the install that you needed to remove them and keep them for later use. My bad! my ORP is at 185 which is very low correct?

 

[G Santana]

Welcome to R2R

 

[kstaley12]

Welcome to R2R!