Has anyone found the 2 pin extension cables for the OR3 bars? Orphek does carry them if you reach out directly, but there is currently a 3-4 week wait on them.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Any luck?
You are right. 4mm is super tiny and I doubt that is the actual size but just to be safe I canceled the order and found one that does look identical. Even the screw caps are the same design. I now have this one arriving tomorrow -Let us know how you make out. The measurements that are in the pics on Amazon look totally off, but would be interested to see if it's a match.
You are right. 4mm is super tiny and I doubt that is the actual size but just to be safe I canceled the order and found one that does look identical. Even the screw caps are the same design. I now have this one arriving tomorrow -
Sorry, no it did not. Still on the hunt. Why are these so hard to findDid it work?
Bummer. How much are the oem cables from orphek?I refuse to contact Orphek for these wires! lol
I have another set on the way. I think I am narrowing it down. I believe they are at least 18AWG wires.
Problem solved. It is a 2 wire, non shielded cable, Just splice in and shrink tube the additional length of wire.Bummer. How much are the oem cables from orphek?
Problem solved. It is a 2 wire, non shielded cable, Just splice in and shrink tube the additional length of wire.I refuse to contact Orphek for these wires! lol
I have another set on the way. I think I am narrowing it down. I believe they are at least 18AWG wires.
I’ve been following this. Thanks for looking into this.Problem solved. It is a 2 wire, non shielded cable, Just splice in and shrink tube the additional length of wire.
This is what it comes down to for me as well. You can buy any 18 gauge led extension wire and just splice. I bought 3 different types and non of them were an exact match. They either had wrong thread or the male and female thread/screw cap was inversed with notches that won't fit.Problem solved. It is a 2 wire, non shielded cable, Just splice in and shrink tube the additional length of wire.