Output nozzle help

[elcapitan1993]

What’s the best size for output nozzle with 1 1/4 inch plumbing? I can’t even find that size output nozzle and I don’t know what size to get either

 

[Pico bam]

Sounds bigish whats the tank size/gph on the pump?

 

[elcapitan1993]

Sounds bigish whats the tank size/gph on the pump?

It’s the Neptune cor 15 that’s why it is so big, the tank is 90 gallons with 20 gallon sump pump output says 1500 but I don’t need it that high

 

[MarshallB]

I plumbed a inch and a half return. I ended up using 1 1/2 inch to 3/4 wye. Basically splits the 1 1/2 to dual 3/4 outputs to use 3/4 nozzles. You might look into splitting it like that as well.

 

[elcapitan1993]

I plumbed a inch and a half return. I ended up using 1 1/2 inch to 3/4 wye. Basically splits the 1 1/2 to dual 3/4 outputs to use 3/4 nozzles. You might look into splitting it like that as well.

Do you have a link to what you are using? I can’t seem to find anything I can connect to 1 1/4 inch pvc pipe

 

[FragFarm]

Do you have a link to what you are using? I can’t seem to find anything I can connect to 1 1/4 inch pvc pipe

You most likely going to need to get a reducer if u are using that you can plumb it straight into yourself too