Par on an actual Reef.

Sdot

Valuable Member
View Badges
Joined
Aug 17, 2017
Messages
1,645
Reaction score
2,515
Location
Houston
Rating - 0%
0   0   0
Hey family, hope all is well during the pandemic. I was messing around with my Apogee 510 Par meter and decided to do some measurements outside in the air. It was reading near 2400 par! So i decided to fill a small bucket of water (around 10 inches deep) and collect readings underwater. The par quickly dropped from 2400 to around 1524 in just 10 inches of water, so im curious about high powered reef lighting and at what depth would the par levels in the ocean be similar to what we are getting in our home reefs.

Is it safe to say that corals are seeing similar par numbers in lets say 10-20 feet of water as they see in our aquariums at 25 inches? Anyone ever take par measurements during a diving trip...really curious.
 

oreo54

5000 Club Member
View Badges
Joined
Sep 18, 2017
Messages
5,531
Reaction score
3,411
Rating - 0%
0   0   0
510 isn't accurate in air...............more correctly it's internally corrected for water:
The MQ-510 sensor has an immersion effect correction factor of 1.32.

divide your air measurement by 1.32
1818 PPFD...........not 2400


As to the rest..
 

Jaebster

Active Member
View Badges
Joined
Nov 19, 2019
Messages
454
Reaction score
988
Rating - 0%
0   0   0
Testing issue in water (assuming you used fresh water). Saltwater is more dense than fresh and seawater has plankton, silts, etc. When you do a water change, save the old water water (of it's clear and not discolored) and try it. I'm sure the par value will reduce than PAR in just fresh water.
 

oreo54

5000 Club Member
View Badges
Joined
Sep 18, 2017
Messages
5,531
Reaction score
3,411
Rating - 0%
0   0   0
Testing issue in water (assuming you used fresh water). Saltwater is more dense than fresh and seawater has plankton, silts, etc. When you do a water change, save the old water water (of it's clear and not discolored) and try it. I'm sure the par value will reduce than PAR in just fresh water.
 

cvrle1

Well-Known Member
View Badges
Joined
Sep 13, 2018
Messages
851
Reaction score
974
Rating - 0%
0   0   0

Didnt see that Oreo already posted this link. Oops
 

alton

Valuable Member
View Badges
Joined
Feb 8, 2016
Messages
1,868
Reaction score
3,215
Location
Zuehl, Texas
Rating - 0%
0   0   0
If you want to simulate the sun try a 400 watt metal halide. When I used 250 watt MH Radium lamps in LuminBright Pendants I recorded Par readings of 1800 to 2000 at the water level. Which was about 9" below the fixture.
 
OP
OP
Sdot

Sdot

Valuable Member
View Badges
Joined
Aug 17, 2017
Messages
1,645
Reaction score
2,515
Location
Houston
Rating - 0%
0   0   0
If you want to simulate the sun try a 400 watt metal halide. When I used 250 watt MH Radium lamps in LuminBright Pendants I recorded Par readings of 1800 to 2000 at the water level. Which was about 9" below the fixture.
My LEDs are plenty bright... i was just curious about the amount of par my tank gets would be equivalent to what depth in the ocean. At 65% im getting over 300 par at the bottom of my tank. This is with the leds mounted 14 inches above the tank. My tank is also a little more than 25 inches tall.
 

A worm with high fashion and practical utility: Have you ever kept feather dusters in your reef aquarium?

  • I currently have feather dusters in my tank.

    Votes: 64 37.0%
  • Not currently, but I have had feather dusters in my tank in the past.

    Votes: 59 34.1%
  • I have not had feather dusters, but I hope to in the future.

    Votes: 24 13.9%
  • I have no plans to have feather dusters in my tank.

    Votes: 26 15.0%
  • Other.

    Votes: 0 0.0%
Back
Top