PH calibration fluid fell into sump, help!

Biff0rz

Valuable Member
View Badges
Joined
Jul 9, 2020
Messages
2,412
Reaction score
1,454
Location
Michigan (SE)
Rating - 100%
2   0   0
I swear, things like this only happen to me lol. I was calibrating my PH probe for my apex. I had the solution package open, sitting in a glass so I wouldn't knock it over. My 2yr old decides he wanted to knock it over. So I was able to grab it and keep about half of it out of the tank but some definitely went in. How screwed am I? Running carbon now but I don't have gfo..
Ingredients in the pic

PXL_20201022_015942243.jpg
 
No idea what will happen. I would do a large water change ASAP just in case.
 
I’m no expert but I would do the 50g then Get the ro ready in case things start to looking unhappy. I’m more of a better safe then sorry guy.
 
Well, I can't really tell you not to do a water change, but honestly I probably wouldn't. It shouldn't hurt anything. The carbon should pull out the dye. Regarding the phosphate, if you have an ats, you could turn it up. If you have a skimmer you could skim a little wetter and carbon dose.
 
Before you go nuts changing water, just run a phosphate test. There's likely not enough in that packet to move it much at all. Dye and preservative are going to be even lower in concentration.

Carbon, phosphate check, and then water change if required, (doubtful)
 
In such a large tank you are fine. There is nothing in the packet that would do harm to even a much smaller tank - I am commenting since I have managed TWICE to drop an entire packet into the sump of my 50 gallon system and all was fine, there was no change in any managed parameter, the amount of buffer in a pack is miniscule. If you do want to do a 50 gallon water change it is beneficial even if you didn’t have the accident. I was too lazy both times to do any water change after fishing out the empty pack.
 
Ok thanks everyone!
In such a large tank you are fine. There is nothing in the packet that would do harm to even a much smaller tank - I am commenting since I have managed TWICE to drop an entire packet into the sump of my 50 gallon system and all was fine, there was no change in any managed parameter, the amount of buffer in a pack is miniscule. If you do want to do a 50 gallon water change it is beneficial even if you didn’t have the accident. I was too lazy both times to do any water change after fishing out the empty pack.
OK, wow, thanks so much! I will hold tight and see how she goes. Phosphate is at 0.27.

Now I sort of need to hear how you did this twice, lol!
 
Thank goodness its ounces, and very little impact. If you’re using carbon, youre good to go. If not- add some
 
Ok thanks everyone!
OK, wow, thanks so much! I will hold tight and see how she goes. Phosphate is at 0.27.

Now I sort of need to hear how you did this twice, lol!
 
I set in the sump to come to temperature, then snip the corner and set it upright on the corner of the sump leaning against the protein skimmer. Next,I pullcause the electrode out of the holder, bumping the skimmer the skimmer which causes the packet to drop into the water. I need to modify a couple of steps....
 
i managed to drop half a packet of 10 PH solution into my sump. should i be concerned? lol


1664893506521.png
 

TOP 10 Trending Threads

WHAT KIND OF REEFING DEAL ARE YOU HOPING TO PICK UP THIS BLACK FRIDAY?

  • A whole new aquarium or complete system

    Votes: 3 13.0%
  • Lighting, pumps, or other major equipment

    Votes: 3 13.0%
  • Controllers, testing, dosing, or automation gear

    Votes: 2 8.7%
  • Dry goods and restocks, like salt, media, or food

    Votes: 2 8.7%
  • Corals! Must...Have...CORALS!!!

    Votes: 5 21.7%
  • Fish or other livestock

    Votes: 1 4.3%
  • Rock, sand, or other aquascaping supplies

    Votes: 1 4.3%
  • I’m browsing, but don’t have a specific target

    Votes: 4 17.4%
  • I’m not shopping for reef deals this year

    Votes: 1 4.3%
  • Other (Post in the comments)

    Votes: 1 4.3%
Back
Top
Home
Post thread…
Market
What's new