Kens Bees
Community Member
- Joined
- Nov 1, 2021
- Messages
- 72
- Reaction score
- 88
- Location
- Massachusetts
- What state or country do you live in
- Massachusetts
Pretty new to the Profilux world but want to start using some of the programmable features. I have stream groups and timers and night variations on those stream groups, so I have been learning.
Now, specifically, when my pH hits 8.3 I would like my skimmer shut down until the pH falls to 8.15, for example. I'm setting up a recirculating CO2 scrubber on the skimmer and want to use this method to maintain a steady pH without solenoids involved.
The skimmer is assigned to a switch and the meter is connected and working. My thought is the PL should read something like;
when pH rises >8.3 then (skimmer socket) off
when pH falls <8.15 then (skimmer socket) on
I don't know if this could alternatively be controlled by the hysteresis function, or if it can play a part in the PL.
Am I going down the right rabbit hole? Any help is appreciated.
Now, specifically, when my pH hits 8.3 I would like my skimmer shut down until the pH falls to 8.15, for example. I'm setting up a recirculating CO2 scrubber on the skimmer and want to use this method to maintain a steady pH without solenoids involved.
The skimmer is assigned to a switch and the meter is connected and working. My thought is the PL should read something like;
when pH rises >8.3 then (skimmer socket) off
when pH falls <8.15 then (skimmer socket) on
I don't know if this could alternatively be controlled by the hysteresis function, or if it can play a part in the PL.
Am I going down the right rabbit hole? Any help is appreciated.
