Powerhead Help Needed

TripleTruble

Active Member
View Badges
Joined
Feb 2, 2020
Messages
352
Reaction score
210
Location
Wisconsin
Rating - 0%
0   0   0
I have a 54 gal corner tank and I am looking for some great discussion on the best powerhead to use for flow. It is a mixed saltwater tank.

F990D516-2319-44B7-AC62-11E97917D49B.jpeg
 
Lots of great discussions on here already. To help sort it out there are a few types of flow different power heads provide. General overall flow, directed flow (both wide and narrow) and gyre flow and these can be cycled by controllers or wave makers.

Personally, I like the pumps that can do more than one of those. DC controllable power head beats AC with wave maker in my opinion in every area except cost. You can get a couple of SIcce Voyagers (only AC designed to be cycled and a high quality pump) with wave maker controller but they're beefy.

I also like directed flow (but I like a broad based directed flow so I can use as fixed overall flow pump if I wish).

I would go with what it does first, over how it looks second. Quality over cost (these things run 24/7 for years).

I have a long discussion of what I use in my build thread and why I shifted from MP-10 to Tunze 6095 if you want pump model specifics.

Good luck!
 
Lots of great discussions on here already. To help sort it out there are a few types of flow different power heads provide. General overall flow, directed flow (both wide and narrow) and gyre flow and these can be cycled by controllers or wave makers.

Personally, I like the pumps that can do more than one of those. DC controllable power head beats AC with wave maker in my opinion in every area except cost. You can get a couple of SIcce Voyagers (only AC designed to be cycled and a high quality pump) with wave maker controller but they're beefy.

I also like directed flow (but I like a broad based directed flow so I can use as fixed overall flow pump if I wish).

I would go with what it does first, over how it looks second. Quality over cost (these things run 24/7 for years).

I have a long discussion of what I use in my build thread and why I shifted from MP-10 to Tunze 6095 if you want pump model specifics.

Good luck!
Thanks I did decide on the Tunze 6055
 
I guess that ends that discussion.:) GL with your build.
 
Thanks I did decide on the Tunze 6055
I just saw your thread this morning and that's exactly what I was going to suggest.
I've been using the 6055 model on my smaller tanks for 12-14 years.
I started out with the a pair 6055's that required the 7095 controller and have switched to the newer style ones that have their own controller.
I have a pair of them in my 32" x 24" x 20" tank.
 
I just saw your thread this morning and that's exactly what I was going to suggest.
I've been using the 6055 model on my smaller tanks for 12-14 years.
I started out with the a pair 6055's that required the 7095 controller and have switched to the newer style ones that have their own controller.
I have a pair of them in my 32" x 24" x 20" tank.
Are you using an SCA 66? I'm searching powerheads right now. THANKS!
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.9%
  • Fish or coral food

    Votes: 5 5.6%
  • Test kits or reagents

    Votes: 9 10.0%
  • Filter media or replacement fleece

    Votes: 5 5.6%
  • RO/DI filters or supplies

    Votes: 14 15.6%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 11.1%
  • I keep a backup of everything

    Votes: 23 25.6%
  • Other (Post in the comments)

    Votes: 7 7.8%
Back
Top
Home
Post thread…
Market
What's new