Just curious if anyone with a Cade PR has ever had any issues with their gravity fed ATO design?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Yes and these 2 great girls at algae barn helped me figure it out. My float was in backwards and had to flip it over n alls perfect now. Hey Raven n samJust curious if anyone with a Cade PR has ever had any issues with their gravity fed ATO design?
Other than the one ato issue I'm very happy. Could use a couple more outlets.Mine came installed backwards as well. Algae barn also helped me figure it out and get it flipped over. Has been working great since then though. @RagnarReef What issues are you seeing?
Well I'm still waiting for the tank to get delivered... was just curious how reliable these are compared to an ATO system like the osmolator.Mine came installed backwards as well. Algae barn also helped me figure it out and get it flipped over. Has been working great since then though. @RagnarReef What issues are you seeing?
Mine took forever to b delivered but a happy wait its been. We have an osmalater on my wife tank and the cade gravity fed and its been very reliable since I flip over the float. I am curious how long before I have to disasimble and clean. I can say there is no pump or ele. Equipment, so a little care n we should never really have big costs to maintain.Well I'm still waiting for the tank to get delivered... was just curious how reliable these are compared to an ATO system like the osmolator.
Hopefully that made sense. I have installed two now and both times I just blew in it to simulate water flow and raised the valve to make sure it cuts the air off. Very easy to get turned around for sure.take It out. Turn it 180 degrees. Loosen the float nut and spin it the other way
this worked, didn't think to turn the entire thing around. it now opens when float in the down position and closed when I raise the float. thankstake It out. Turn it 180 degrees. Loosen the float nut and spin it the other way
I am glad I was able to help. Very easy to turn them around.this worked, didn't think to turn the entire thing around. it now opens when float in the down position and closed when I raise the float. thanks
Once I flipped it over, it works fine. My problem is that I can't see the ATO water level through the little windows. Glass isn't clear. Maybe I need more light? Although even with a flashlight I can't see the level.Just curious if anyone with a Cade PR has ever had any issues with their gravity fed ATO design?
The window is to show you're on the empty side. As long as you keep resavoir full you won't b able to see itOnce I flipped it over, it works fine. My problem is that I can't see the ATO water level through the little windows. Glass isn't clear. Maybe I need more light? Although even with a flashlight I can't see the level.
Thanks! So do I understand correctly that I won't see a level until the reservoir is nearing empty?The window is to show you're on the empty side. As long as you keep resavoir full you won't b able to see it
That is correct, shows when you have a very low reserveThanks! So do I understand correctly that I won't see a level until the reservoir is nearing empty?