pump for uv sterilizer

[tom33]

Hello everybody,

I am looking for a pump for my sunsun cuv-111 UV sterilizer.

I am looking for a quiet pump, what do you think of the axis20 pump.

I currently have a tunze Silence 1073.008 , but it makes a lot of noise

---

 

[slythy]

Depending on your flow rate you could just hook it up to your return. Or have your return t off to run it

 

[The_Paradox]

I use These. They are dead quiet and cheap. Have two that have been running for over 2 years never cleaned them. One is on a chiller and another is on a UV.

 

[tom33]

Depending on your flow rate you could just hook it up to your return. Or have your return t off to run it

My pump goes up to too high a flow rate 2000 liters/hour

 

[tom33]

I use These. They are dead quiet and cheap. Have two that have been running for over 2 years never cleaned them. One is on a chiller and another is on a UV.

Not found in Europe at a reasonable price :crying-face:
Twice as expensive as the axis20

 

[slythy]

My pump goes up to too high a flow rate 2000 liters/hour

Thats like 530gph assuming zero losses. I run 700gph through my 2x57w aquauv’s

Edit- just realized the cuv-111 is 11w not 111w. So way too much lol. Jebao pumps are quiet and reliable.

 

[tom33]

Thats like 530gph assuming zero losses. I run 700gph through my 2x57w aquauv’s

Edit- just realized the cuv-111 is 11w not 111w. So way too much lol. Jebao pumps are quiet and reliable.

yes I am looking for a pump with a flow rate of 600 to 800 liters per hour