Purchasing RO/DI unit

  • Thread starter Thread starter Plunder
  • Start date Start date
  • Tagged users Tagged users None

Plunder

Active Member
View Badges
Joined
May 13, 2020
Messages
152
Reaction score
97
Location
down under
What state or country do you live in
California
Rating - 0%
0   0   0
I've been looking at the RO/DI units and I found what seems like a decent one for $240. It's the Essence premium quality 75 GPD +pH alkalinity using calcium mineral cartridges. Has anyone used one of these? Sounds too good to be true, do you think it might give the required minerals without having to dose or use extra equipment?
 
That system is for making drinking water, the mineral cartridge is to add flavor to water after it is stripped clean by the RO system.
 
The brs 4-stage is a pretty decent entry RODI unit for around $150. Spectrapure is another great brand, and is my preference.
 
You sure that’s an RO DI system or just an RO with some odd calcium supplement cartridge? Me personally, go with what works and no gimicky things.

If this is what you are referring to it’s just an RO system. It’s missing the DI side.
https://www.homedepot.com/p/APEC-Wa...nking-Water-Filter-System-ROES-PH75/206314523
A basic RO system can have a separate purchased DI cartridge added to it.

Good catch, I didn't even notice that. I did a little more searching and found a Koolermax AR-122 6-stage RO+DI on amazon for $145. I like that it comes with an attachment for a garden hose fitting as I would use that to add the water to my 44g brute. Anyone try or heard anything about the Koolermax models?
 
I personally have the BRS 150GPD with twin DI canisters, twin membrains and automatic shut off valve, thing just makes great water and the 3 way tds Meter let's you keep a eye on when the filters and membrains are getting bad, i have mine hooked up to a float on my main RO/di water can and its set and forget, but remember water pressure is important, if your house water pressure is not at least 55psi a booster pump may be needed for the 150GPD , you can go with the 75GPD with lower inlet water pressure just my 2 cents
 
I also have the brs water saver unit and it works great, find a similar system from a good seller and you should be good
 
I personally have the BRS 150GPD with twin DI canisters, twin membrains and automatic shut off valve, thing just makes great water and the 3 way tds Meter let's you keep a eye on when the filters and membrains are getting bad, i have mine hooked up to a float on my main RO/di water can and its set and forget, but remember water pressure is important, if your house water pressure is not at least 55psi a booster pump may be needed for the 150GPD , you can go with the 75GPD with lower inlet water pressure just my 2 cents

I like that Koolermax AR-122 has a built-in water pressure indicator. It said 85psi was ideal. I never really messed around with the water pressure in the house before, so I'm not sure what it is. But couldn't the pressure from a garden hose be adjusted easier than say in the house?
 
House pressure is the same inside or outside. If there is an adjustment it should be by the pipe entering the house. Many RODI's come with a pressure gauge. Spectrapure,BRS, Buckeye Hydro, all good systems.
 
I like that Koolermax AR-122 has a built-in water pressure indicator. It said 85psi was ideal. I never really messed around with the water pressure in the house before, so I'm not sure what it is. But couldn't the pressure from a garden hose be adjusted easier than say in the house?
Yes most house houses are around 50 to 55, the brs has a pressure gage also, but yes it would be better to adjust pressure at a water inlet or at your water heater inlet
 
The water pressure gauge is there so that you can see what your house pressure is initially and also so that you can gauge if things are clogging up. If your house pressure does not go over say 55 you might want to add a booster pump. My unit consists of the following:

1 micron sediment
2 1 micron carbon blocks
2 75gpd membranes
2 di resin stages
1 pressure gauge
3 sensor TDS meter
Manual flush valve

My water pressure is usually 65-70 psi so I do not require a booster pump, when my water pressure drops it's usually due to my sediment filter being partially clogged, also the 3 way tds lets me keep tabs on tds after the membranes, after the first di cartridge and after the second di cartridge.
 
9 times outta 10 most 50 to 75 GPD units are good for most houses, the standard water presure is 50psi unless you live on well water or something not provided by your city
 
9 times outta 10 most 50 to 75 GPD units are good for most houses, the standard water presure is 50psi unless you live on well water or something not provided by your city
I have the dual membrane model for the water saver feature more than for the faster water production. In my case I do make quite a bit of water and it makes me feel better to waste a little less than I used to with my 75gpd unit.
 
I think you are going at this backwards. Picking the right filter should start with what your specific needs are.
To start with - are you filtering water from a well, municipal supply, rain water collector?
Do you have chlorine or chloramine?
What water pressure do you have (you may need a booster pump)?
How much water do you need to make over what period of time?
Is high volume of waste water a concern (some areas have very expensive water so 50% waste is a problem)?
Are you willing to invest a little more up-front to save money down the road?
 
Last edited:
Good catch, I didn't even notice that. I did a little more searching and found a Koolermax AR-122 6-stage RO+DI on amazon for $145. I like that it comes with an attachment for a garden hose fitting as I would use that to add the water to my 44g brute. Anyone try or heard anything about the Koolermax models?

I installed one last week. Works just fine.
IMG_20200518_143503.jpg


Ignore the crooked pipe, brain damage...
 
I haven't made my saltwater mixing station yet but that is for this Sunday project, I kinda weird about clean looking and fuction

15898470029064026778390605764651.jpg 15898470162111854867608938818926.jpg 15898470428553173508501738599628.jpg
 

TOP 10 Trending Threads

HOW WOULD YOU FEEL ABOUT RECEIVING A FISH OR CORAL AS A HOLIDAY GIFT?

  • I’d love one, as long as it’s a species I chose

    Votes: 21 25.6%
  • I’d trust someone who knows my tank to choose

    Votes: 8 9.8%
  • I’d rather get a gift card and pick it myself

    Votes: 30 36.6%
  • I’d prefer gear or supplies instead

    Votes: 2 2.4%
  • Please don’t surprise me with livestock

    Votes: 21 25.6%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new