Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Have you read on this programming on a different Outlet? Do you think the problem could be a relay sticking? What sort of relays are you using? What type of pump are you using?
It means that in one of the pi only ssh is running (port 22) while on the other both reef-pi (port 80) and ssh (port 22) is running.Hi to all,could someone to tell me why one of the Reef-pi have port 80,22 open and the second one only port 22. Thank you
Yes, it replaces all ac components (relay and sockets). It uses the same inside (relay and socket) it’s own housing .
Did I answer your question?
https://learn.adafruit.com/reef-pi-power-controller/overviewYes you did! Next question is how to integrate it into the reef-pi. I believe this comes with a db-9 port of some kind? Is there a special pin-out for this?
https://learn.adafruit.com/reef-pi-power-controller/overview
Let me know if you have more questions
Think of it as my way to keep my own hands off from my tanks , while still be involved heavily in reefing.Your support on this is nothing short of amazing.
Think of it as my way to keep my own hands off from my tanks , while still be involved heavily in reefing.
There are other folks who are now doing bulk of the coding (@Michael Lane & @Zekth )
I picked it up at a local electric supply house, but the mfg website is https://www.av-iq.com/avcat/ctl1642...trorack-enclosure-products&product=pb12018-01 and they have a search to find a local place that carries them.@noob again What is the power strip you are using?
I just discovered those a couple of days ago. I shared them on FB. Thanks Ranjib!Adafruit just published the third reef-pi guide, temperature controller ,
https://learn.adafruit.com/reef-pi-guide-3-temperature-controller
Thank youI just discovered those a couple of days ago. I shared them on FB. Thanks Ranjib!
I found some previous info on the ATO, and that was one of the first things i planned on integrating.Thank you
I plan to write a full series, this is the third one, at least five more to come (ato, lighting, ph, doser and finally AIO) leading up to Thankgiving, when final 2.0 release will happen. Should be fun
You should be able to use any logic level powermosfet to control 24V volt with 5v pwm signal. I do the same for my moonlight. I think i have shared the circuit image in past, i can post it again if you needI plan to start to playing with some break outs for jebao pump hook up. Something that marries the 24v power to a pwm signal that then connects right to the jebao connector. Use the jebao power supply.