reef-pi :: An opensource reef tank controller based on Raspberry Pi.

waynel · Jul 4, 2020

Twice now, the ATO from my reef-pi has ran much longer than it should. The first time it ran for over a minute, the second, it ran for a little over 20 seconds. It's not the float sticking. My setup:
Reef-pi 3.4 running on pi zero w. ATO consists of small 120VAC submersible pump powered by reef-pi via adj power strip, marinedepot float switch, and a 5 gallon bucket of RODI water. I have reef-pi configured to check the float switch every 7 seconds and to alert me if runs more than 10 seconds.
In testing, this worked great, and typically, 7 seconds is enough time to top off from evaporation with the pump I'm using. When I got alerted the first time, it kept running for a little over 1 minute and I got alerted multiple times. I got to the tank shortly after, and the float was up, so I don't know what happened. The second time, I was in the house when I got alerted, ran to the tank, the float again was up, but it was still pumping, the water level was well above where it should be. It stopped after running a little over 20 seconds.

Can reef-pi handle checking every second? I'm wondering if it's not checking often enough our quickly enough. Can it miss a cycle?

I've also added a second float and set reefpi to monitor it - if the water level gets to high, it should detect it on this float, and I have a macro it will trigger to shut off power to the ATO pump and return pump.

bishoptf · Jul 5, 2020

waynel said:
Twice now, the ATO from my reef-pi has ran much longer than it should. The first time it ran for over a minute, the second, it ran for a little over 20 seconds. It's not the float sticking. My setup:
Reef-pi 3.4 running on pi zero w. ATO consists of small 120VAC submersible pump powered by reef-pi via adj power strip, marinedepot float switch, and a 5 gallon bucket of RODI water. I have reef-pi configured to check the float switch every 7 seconds and to alert me if runs more than 10 seconds.
In testing, this worked great, and typically, 7 seconds is enough time to top off from evaporation with the pump I'm using. When I got alerted the first time, it kept running for a little over 1 minute and I got alerted multiple times. I got to the tank shortly after, and the float was up, so I don't know what happened. The second time, I was in the house when I got alerted, ran to the tank, the float again was up, but it was still pumping, the water level was well above where it should be. It stopped after running a little over 20 seconds.

Can reef-pi handle checking every second? I'm wondering if it's not checking often enough our quickly enough. Can it miss a cycle?

I've also added a second float and set #reefpi to monitor it - if the water level gets to high, it should detect it on this float, and I have a macro it will trigger to shut off power to the ATO pump and return pump.

Which version of #reefpi are you using? I have a new setup with ATO and its been solid (*cough* except for when I forget to turn it off during my water change, oops). I have a pretty small usb based pump and have mine setup to run for 17secs and thats all it runs. I have three floats on the ATO, 2 in the sump, one primary and then a backup as a failsafe, then there is an additional float in the ATO container that will turn the ATO off when the water level gets low. I have an additional ATO circuit in the ATO container that lights a LED when the water level gets low to alert me to fill the container (it also emails me).

Seems like something is not quite right with the float switches, at least that is my guess I have yet to see mine run past the set time its pretty consistent right now. What kind of switches are you using and how did you mount them? You can look at my build thread to see how I have mine mounted, I used cpvc and the tube is dry to keep water from the wire connection on the back end, I have several of mine fully submerged and I wanted to keep the wire side connections dry.

Thats my best guess at the moment, someone else may have some better ideas of things to check/verify.

:)

bishoptf · Jul 5, 2020

Which PH module is being used the most these days, that is one of the last additions and wasn't sure which ones tend to be the ones to use?

Thanks
:)

Ranjib · Jul 5, 2020

waynel said:
Twice now, the ATO from my reef-pi has ran much longer than it should. The first time it ran for over a minute, the second, it ran for a little over 20 seconds. It's not the float sticking. My setup:
Reef-pi 3.4 running on pi zero w. ATO consists of small 120VAC submersible pump powered by reef-pi via adj power strip, marinedepot float switch, and a 5 gallon bucket of RODI water. I have reef-pi configured to check the float switch every 7 seconds and to alert me if runs more than 10 seconds.
In testing, this worked great, and typically, 7 seconds is enough time to top off from evaporation with the pump I'm using. When I got alerted the first time, it kept running for a little over 1 minute and I got alerted multiple times. I got to the tank shortly after, and the float was up, so I don't know what happened. The second time, I was in the house when I got alerted, ran to the tank, the float again was up, but it was still pumping, the water level was well above where it should be. It stopped after running a little over 20 seconds.

Can reef-pi handle checking every second? I'm wondering if it's not checking often enough our quickly enough. Can it miss a cycle?

I've also added a second float and set reefpi to monitor it - if the water level gets to high, it should detect it on this float, and I have a macro it will trigger to shut off power to the ATO pump and return pump.

1s check interval for ATO is OK, as long as you don't have many other things running at same smaller duration. Best is to check the CPU usage graph and its safe as long as cpu usage is not going above 70%.
Theres was a bug in ATO's disable on alert feature, which I fixed recently. Before that feature would work only on the first hour of ATO setup :-( . Its fixed and released now ..

waynel · Jul 6, 2020

Tom Bishop said:
Which version of #reefpi are you using? I have a new setup with ATO and its been solid (*cough* except for when I forget to turn it off during my water change, oops). I have a pretty small usb based pump and have mine setup to run for 17secs and thats all it runs. I have three floats on the ATO, 2 in the sump, one primary and then a backup as a failsafe, then there is an additional float in the ATO container that will turn the ATO off when the water level gets low. I have an additional ATO circuit in the ATO container that lights a LED when the water level gets low to alert me to fill the container (it also emails me).

Seems like something is not quite right with the float switches, at least that is my guess I have yet to see mine run past the set time its pretty consistent right now. What kind of switches are you using and how did you mount them? You can look at my build thread to see how I have mine mounted, I used cpvc and the tube is dry to keep water from the wire connection on the back end, I have several of mine fully submerged and I wanted to keep the wire side connections dry.

Thats my best guess at the moment, someone else may have some better ideas of things to check/verify.

:)

I'm running 3.4, installed about 3 weeks ago. The two float switches I'm using are this type (https://www.marinedepot.com/marine-...agnetic-mounting-bracket-for-auto-top-off-ato). I did change my reef-pi ato settings to check the switches every 1 second.

I'll get some screen shots of my settings and pictures of the setup this evening, maybe you'll see something I'm doing incorrectly or a better way to do it.

waynel · Jul 6, 2020

Ranjib said:
1s check interval for ATO is OK, as long as you don't have many other things running at same smaller duration. Best is to check the CPU usage graph and its safe as long as cpu usage is not going above 70%.
Theres was a bug in ATO's disable on alert feature, which I fixed recently. Before that feature would work only on the first hour of ATO setup :-( . Its fixed and released now ..

I'll check the CPU utilization this evening, but pretty sure it's staying below 20%. I have ti running my viparspectra lights, 3 temp sensors, 2 float switches, and my ADJ power strip.

I'm running 3.4 which I downloaded about 3 weeks ago. Is that the latest? Is it possible to update to get any patches directly to a running version? Just do another wget -c https://github.com/reef-pi/reef-pi/releases/download/0.5/reef-pi-x.x-pi0.deb and dpkg to install it over top the running version?

I'm not using the disable on alert feature at the present. I just have one ATO added to check the first float switch once per second and it enables the outlet assigned to the ATO pump if the switch is enabled (indicating low water level), and once the water level rises enough to raise the float, that ATO check should turn off that outlet. I've added a second ATO check for the second float as a backup - if the water level goes too high, it will turn off the ATO pump outlet and the main return pump and alert me via email that there's an issue.

These are working, it's just that the first ATO setup runs too long sometimes, like the reefpi isn't seeing that float switch is up again. I've checked the switch and it's not stuck when this happens. The water level is getting way above the switch when this happens, enough that my backup switch is engaging. Is there a log I can look at that shows what reef-pi is seeing/doing?

waynel · Jul 6, 2020

One other issue that just came up - I started getting alerts:
Temperature sensor failure. Error: First line of device file does not ends with YES

Temperature sensor failure. Error: open /sys/bus/w1//devices/28-3c01b556cc6e/w1_slave: no such file or directory

Getting these for all three temp probes, started about 1 hr ago. Getting them every few seconds. I'm at work, called my wife and walked her through rebooting the reef-pi, still getting the errors.

bishoptf · Jul 6, 2020

waynel said:
One other issue that just came up - I started getting alerts:
Temperature sensor failure. Error: First line of device file does not ends with YES

Temperature sensor failure. Error: open /sys/bus/w1//devices/28-3c01b556cc6e/w1_slave: no such file or directory

Getting these for all three temp probes, started about 1 hr ago. Getting them every few seconds. I'm at work, called my wife and walked her through rebooting the reef-pi, still getting the errors.

The temp probe issue is a known 3.4 issue (its just a nag and shouldnt cause any issues), I would try rolling back to 3.3, it will solve your temp issue and maybe give a different result on your ATO issue, easy enough to try. @Ranjib can correct me but if you copy your database out and then downgrade to 3.3 you should be able to restore the database and no have to re-create everything, I think that should work for 3.4 -> 3.3.

For looking at the log you want to use journalctl for that, see this link - https://reef-pi.github.io/additional-documentation/troubleshooting/

:)

waynel · Jul 6, 2020

Tom Bishop said:
The temp probe issue is a known 3.4 issue (its just a nag and shouldnt cause any issues), I would try rolling back to 3.3, it will solve your temp issue and maybe give a different result on your ATO issue, easy enough to try. @Ranjib can correct me but if you copy your database out and then downgrade to 3.3 you should be able to restore the database and no have to re-create everything, I think that should work for 3.4 -> 3.3.

For looking at the log you want to use journalctl for that, see this link - https://reef-pi.github.io/additional-documentation/troubleshooting/

:)

I will try downgrading this evening. It's odd that the temperature issue just happened today. Been running ok for a while now.

Bob Tiffany · Jul 6, 2020

Bigtrout said:
It does not send equipmemt feeds.

Also for a free account it only uses 10 feeds amd you dont get to choose...it sends the first 10 setup in reef pi. The rest error out.

Awesome, that makes sense. Thanks!

Another question. I want to build a simple momentary push button circuit to trigger a macro to shut down my wave maker and protein slimmer for feeding. Has anybody done this? Thanks!

Des Westcott · Jul 7, 2020

Tom Bishop said:
I have some time on my hands and thinking about trying to do something in regards to documentation. I know we have the build threads but thought it might be nice to have something per function that goes over all of the options and what and how they can be used. Does anyone know if this has been started or if anyone is working on something like this?

Would this be something that others would be interested in? Would love to have it on a wiki page but I guess those are old school but that would be a nice way to host it and allow updates.

Let me know what folks think!

:)

@robsworld78 created a document on Google Docs

https://docs.google.com/document/d/1afj-0-hqSy990sXZCGuDkTx9sZCk7Vpa/edit#

which some of us were contributing to and helping edit. It's a great start I think.

Des Westcott · Jul 7, 2020

Bob Tiffany said:
Awesome, that makes sense. Thanks!

Another question. I want to build a simple momentary push button circuit to trigger a macro to shut down my wave maker and protein slimmer for feeding. Has anybody done this? Thanks!

I have tried doing it using an ATO function to trigger a Macro. While reef-pi will let you set it up, it doesn't work.

I assume it's linked to timers and macros triggering Macros only in reverse when made reversible. Probably not exactly the same thing, but linked in some way.

waynel · Jul 8, 2020

waynel said:
I will try downgrading this evening. It's odd that the temperature issue just happened today. Been running ok for a while now.

I downgraded to 3.3.1, but still having trouble with my temp sensors. I have 3 temp sensors connected, but it's only seeing one of those now (the other two are not listed), and the one that does appear isn't working.
Here's some output from the journalctl:

pi@tank125:~ $ sudo journalctl -fu reef-pi.service

-- Logs begin at Tue 2020-07-07 23:41:27 EDT. --

Jul 08 00:16:14 tank125 reef-pi[295]: 2020/07/08 00:16:14 ERROR: GET /api/tcs/2/usage stats for id: '2' not found

Jul 08 00:16:14 tank125 reef-pi[295]: 2020/07/08 00:16:14 API Request:' GET /api/equipment' from: 192.168.86.250:56917

Jul 08 00:16:14 tank125 reef-pi[295]: 2020/07/08 00:16:14 API Request:' GET /api/atos/current/usage' from: 192.168.86.250:56916

Jul 08 00:16:14 tank125 reef-pi[295]: 2020/07/08 00:16:14 ERROR: stats for id: 'current' not found

Jul 08 00:16:14 tank125 reef-pi[295]: 2020/07/08 00:16:14 ERROR: GET /api/atos/current/usage stats for id: 'current' not found

Jul 08 00:16:14 tank125 reef-pi[295]: 2020/07/08 00:16:14 API Request:' GET /api/atos/2/usage' from: 192.168.86.250:56915

Jul 08 00:16:14 tank125 reef-pi[295]: 2020/07/08 00:16:14 ato sub-system: sensor Ato value: 1

Jul 08 00:16:14 tank125 reef-pi[295]: 2020/07/08 00:16:14 Euipment: 6 On: false

Jul 08 00:16:15 tank125 reef-pi[295]: 2020/07/08 00:16:15 ato sub-system: sensor Ato value: 1

Jul 08 00:16:15 tank125 reef-pi[295]: 2020/07/08 00:16:15 Euipment: 6 On: false

Jul 08 00:16:15 tank125 reef-pi[295]: 2020/07/08 00:16:15 lighting subsystem: Setting Light: Lights Channel: White Value: 0

Jul 08 00:16:15 tank125 reef-pi[295]: 2020/07/08 00:16:15 lighting-subsystem: Setting PWM value: 0 at channel: 13

Jul 08 00:16:15 tank125 reef-pi[295]: 2020/07/08 00:16:15 onTime 0 offTime 4096

Jul 08 00:16:15 tank125 reef-pi[295]: 2020/07/08 00:16:15 lighting subsystem: Setting Light: Lights Channel: Blue Value: 0

Jul 08 00:16:15 tank125 reef-pi[295]: 2020/07/08 00:16:15 lighting-subsystem: Setting PWM value: 0 at channel: 14

Jul 08 00:16:15 tank125 reef-pi[295]: 2020/07/08 00:16:15 onTime 0 offTime 4096

Jul 08 00:16:15 tank125 reef-pi[295]: 2020/07/08 00:16:15 API Request:' GET /api/me' from: [2605:a000:1708:21cb:3db4:c6c7:db90:dda2]:57821

Jul 08 00:16:16 tank125 reef-pi[295]: 2020/07/08 00:16:16 ato sub-system: sensor Ato value: 1

Jul 08 00:16:16 tank125 reef-pi[295]: 2020/07/08 00:16:16 Euipment: 6 On: false

Jul 08 00:16:16 tank125 reef-pi[295]: 2020/07/08 00:16:16 ato sub-system: sensor Overflow value: 0

Jul 08 00:16:16 tank125 reef-pi[295]: 2020/07/08 00:16:16 ERROR: Failed to execute ato control logic. Error: macro is not reversible

Jul 08 00:16:17 tank125 reef-pi[295]: 2020/07/08 00:16:17 ato sub-system: sensor Ato value: 1

Jul 08 00:16:17 tank125 reef-pi[295]: 2020/07/08 00:16:17 Euipment: 6 On: false

Jul 08 00:16:18 tank125 reef-pi[295]: 2020/07/08 00:16:18 ato sub-system: sensor Ato value: 1

Jul 08 00:16:18 tank125 reef-pi[295]: 2020/07/08 00:16:18 Euipment: 6 On: false

Jul 08 00:16:19 tank125 reef-pi[295]: 2020/07/08 00:16:19 ato sub-system: sensor Ato value: 1

Jul 08 00:16:19 tank125 reef-pi[295]: 2020/07/08 00:16:19 Euipment: 6 On: false

Jul 08 00:16:19 tank125 reef-pi[295]: 2020/07/08 00:16:19 API Request:' GET /api/me' from: [2605:a000:1708:21cb:3db4:c6c7:db90:dda2]:57821

Jul 08 00:16:19 tank125 reef-pi[295]: 2020/07/08 00:16:19 ato sub-system: sensor Overflow value: 0

Jul 08 00:16:19 tank125 reef-pi[295]: 2020/07/08 00:16:19 ERROR: Failed to execute ato control logic. Error: macro is not reversible

Jul 08 00:16:20 tank125 reef-pi[295]: 2020/07/08 00:16:20 ato sub-system: sensor Ato value: 1

Jul 08 00:16:20 tank125 reef-pi[295]: 2020/07/08 00:16:20 Euipment: 6 On: false

Jul 08 00:16:20 tank125 reef-pi[295]: 2020/07/08 00:16:20 health check: Used memory: 19.4 Load5: 0.29

Jul 08 00:16:21 tank125 reef-pi[295]: 2020/07/08 00:16:21 ato sub-system: sensor Ato value: 1

Jul 08 00:16:21 tank125 reef-pi[295]: 2020/07/08 00:16:21 Euipment: 6 On: false

Jul 08 00:16:22 tank125 reef-pi[295]: 2020/07/08 00:16:22 ato sub-system: sensor Ato value: 1

Jul 08 00:16:22 tank125 reef-pi[295]: 2020/07/08 00:16:22 Euipment: 6 On: false

Jul 08 00:16:22 tank125 reef-pi[295]: 2020/07/08 00:16:22 ato sub-system: sensor Overflow value: 0

Jul 08 00:16:22 tank125 reef-pi[295]: 2020/07/08 00:16:22 ERROR: Failed to execute ato control logic. Error: macro is not reversible

Jul 08 00:16:23 tank125 reef-pi[295]: 2020/07/08 00:16:23 ato sub-system: sensor Ato value: 1

Jul 08 00:16:23 tank125 reef-pi[295]: 2020/07/08 00:16:23 Euipment: 6 On: false

Jul 08 00:16:23 tank125 reef-pi[295]: 2020/07/08 00:16:23 API Request:' GET /api/me' from: [2605:a000:1708:21cb:3db4:c6c7:db90:dda2]:57821

Jul 08 00:16:24 tank125 reef-pi[295]: 2020/07/08 00:16:24 ato sub-system: sensor Ato value: 1

Jul 08 00:16:24 tank125 reef-pi[295]: 2020/07/08 00:16:24 Euipment: 6 On: false

Jul 08 00:16:24 tank125 reef-pi[295]: 2020/07/08 00:16:24 API Request:' GET /api/me' from: 192.168.86.250:56915

Jul 08 00:16:24 tank125 reef-pi[295]: 2020/07/08 00:16:24 API Request:' GET /api/tcs/1/usage' from: 192.168.86.250:56915

Jul 08 00:16:25 tank125 reef-pi[295]: 2020/07/08 00:16:25 API Request:' GET /api/tcs/3/usage' from: 192.168.86.250:56920

Jul 08 00:16:25 tank125 reef-pi[295]: 2020/07/08 00:16:25 ERROR: stats for id: '3' not found

Jul 08 00:16:25 tank125 reef-pi[295]: 2020/07/08 00:16:25 ERROR: GET /api/tcs/3/usage stats for id: '3' not found

Jul 08 00:16:25 tank125 reef-pi[295]: 2020/07/08 00:16:25 API Request:' GET /api/atos/1/usage' from: 192.168.86.250:56919

Jul 08 00:16:25 tank125 reef-pi[295]: 2020/07/08 00:16:25 API Request:' GET /api/tcs/2/usage' from: 192.168.86.250:56918

Jul 08 00:16:25 tank125 reef-pi[295]: 2020/07/08 00:16:25 ERROR: stats for id: '2' not found

Jul 08 00:16:25 tank125 reef-pi[295]: 2020/07/08 00:16:25 ERROR: GET /api/tcs/2/usage stats for id: '2' not found

Jul 08 00:16:25 tank125 reef-pi[295]: 2020/07/08 00:16:25 API Request:' GET /api/equipment' from: 192.168.86.250:56917

Jul 08 00:16:25 tank125 reef-pi[295]: 2020/07/08 00:16:25 API Request:' GET /api/atos/current/usage' from: 192.168.86.250:56916

Jul 08 00:16:25 tank125 reef-pi[295]: 2020/07/08 00:16:25 ERROR: stats for id: 'current' not found

Jul 08 00:16:25 tank125 reef-pi[295]: 2020/07/08 00:16:25 ERROR: GET /api/atos/current/usage stats for id: 'current' not found

Jul 08 00:16:25 tank125 reef-pi[295]: 2020/07/08 00:16:25 ERROR: stats for id: '1' not found

Jul 08 00:16:25 tank125 reef-pi[295]: 2020/07/08 00:16:25 ERROR: GET /api/tcs/1/usage stats for id: '1' not found

Jul 08 00:16:25 tank125 reef-pi[295]: 2020/07/08 00:16:25 API Request:' GET /api/atos/2/usage' from: 192.168.86.250:56920

Jul 08 00:16:25 tank125 reef-pi[295]: 2020/07/08 00:16:25 ato sub-system: sensor Ato value: 1

Jul 08 00:16:25 tank125 reef-pi[295]: 2020/07/08 00:16:25 Euipment: 6 On: false

Jul 08 00:16:25 tank125 reef-pi[295]: 2020/07/08 00:16:25 ato sub-system: sensor Overflow value: 0

Jul 08 00:16:25 tank125 reef-pi[295]: 2020/07/08 00:16:25 ERROR: Failed to execute ato control logic. Error: macro is not reversible

Jul 08 00:16:26 tank125 reef-pi[295]: 2020/07/08 00:16:26 ato sub-system: sensor Ato value: 1

Jul 08 00:16:26 tank125 reef-pi[295]: 2020/07/08 00:16:26 Euipment: 6 On: false

Jul 08 00:16:27 tank125 reef-pi[295]: 2020/07/08 00:16:27 ato sub-system: sensor Ato value: 1

Jul 08 00:16:27 tank125 reef-pi[295]: 2020/07/08 00:16:27 Euipment: 6 On: false

Jul 08 00:16:27 tank125 reef-pi[295]: 2020/07/08 00:16:27 API Request:' GET /api/me' from: [2605:a000:1708:21cb:3db4:c6c7:db90:dda2]:57821

Jul 08 00:16:28 tank125 reef-pi[295]: 2020/07/08 00:16:28 ato sub-system: sensor Ato value: 1

Jul 08 00:16:28 tank125 reef-pi[295]: 2020/07/08 00:16:28 Euipment: 6 On: false

Jul 08 00:16:28 tank125 reef-pi[295]: 2020/07/08 00:16:28 ato sub-system: sensor Overflow value: 0

Jul 08 00:16:28 tank125 reef-pi[295]: 2020/07/08 00:16:28 ERROR: Failed to execute ato control logic. Error: macro is not reversible

Jul 08 00:16:29 tank125 reef-pi[295]: 2020/07/08 00:16:29 ato sub-system: sensor Ato value: 1

Jul 08 00:16:29 tank125 reef-pi[295]: 2020/07/08 00:16:29 Euipment: 6 On: false

Jul 08 00:16:30 tank125 reef-pi[295]: 2020/07/08 00:16:30 ato sub-system: sensor Ato value: 1

Jul 08 00:16:30 tank125 reef-pi[295]: 2020/07/08 00:16:30 Euipment: 6 On: false

Jul 08 00:16:31 tank125 reef-pi[295]: 2020/07/08 00:16:31 ato sub-system: sensor Ato value: 1

Jul 08 00:16:31 tank125 reef-pi[295]: 2020/07/08 00:16:31 Euipment: 6 On: false

Jul 08 00:16:31 tank125 reef-pi[295]: 2020/07/08 00:16:31 API Request:' GET /api/me' from: [2605:a000:1708:21cb:3db4:c6c7:db90:dda2]:57821

Jul 08 00:16:31 tank125 reef-pi[295]: 2020/07/08 00:16:31 ato sub-system: sensor Overflow value: 0

Jul 08 00:16:31 tank125 reef-pi[295]: 2020/07/08 00:16:31 ERROR: Failed to execute ato control logic. Error: macro is not reversible

Jul 08 00:16:32 tank125 reef-pi[295]: 2020/07/08 00:16:32 ato sub-system: sensor Ato value: 1

Jul 08 00:16:32 tank125 reef-pi[295]: 2020/07/08 00:16:32 Euipment: 6 On: false

Jul 08 00:16:33 tank125 reef-pi[295]: 2020/07/08 00:16:33 ato sub-system: sensor Ato value: 1

Jul 08 00:16:33 tank125 reef-pi[295]: 2020/07/08 00:16:33 Euipment: 6 On: false

Jul 08 00:16:34 tank125 reef-pi[295]: 2020/07/08 00:16:34 ato sub-system: sensor Ato value: 1

Jul 08 00:16:34 tank125 reef-pi[295]: 2020/07/08 00:16:34 Euipment: 6 On: false

Jul 08 00:16:34 tank125 reef-pi[295]: 2020/07/08 00:16:34 ato sub-system: sensor Overflow value: 0

Jul 08 00:16:34 tank125 reef-pi[295]: 2020/07/08 00:16:34 ERROR: Failed to execute ato control logic. Error: macro is not reversible

Jul 08 00:16:35 tank125 reef-pi[295]: 2020/07/08 00:16:35 ato sub-system: sensor Ato value: 1

Jul 08 00:16:35 tank125 reef-pi[295]: 2020/07/08 00:16:35 Euipment: 6 On: false

Jul 08 00:16:35 tank125 reef-pi[295]: 2020/07/08 00:16:35 API Request:' GET /api/health_stats' from: 192.168.86.250:56916

Jul 08 00:16:35 tank125 reef-pi[295]: 2020/07/08 00:16:35 API Request:' GET /api/me' from: 192.168.86.250:56915

Jul 08 00:16:35 tank125 reef-pi[295]: 2020/07/08 00:16:35 API Request:' GET /api/me' from: [2605:a000:1708:21cb:3db4:c6c7:db90:dda2]:57821

Jul 08 00:16:35 tank125 reef-pi[295]: 2020/07/08 00:16:35 API Request:' GET /api/tcs/1/usage' from: 192.168.86.250:56915

Jul 08 00:16:36 tank125 reef-pi[295]: 2020/07/08 00:16:36 API Request:' GET /api/tcs/3/usage' from: 192.168.86.250:56920

Jul 08 00:16:36 tank125 reef-pi[295]: 2020/07/08 00:16:36 ERROR: stats for id: '3' not found

Jul 08 00:16:36 tank125 reef-pi[295]: 2020/07/08 00:16:36 ERROR: GET /api/tcs/3/usage stats for id: '3' not found

Jul 08 00:16:36 tank125 reef-pi[295]: 2020/07/08 00:16:36 API Request:' GET /api/atos/1/usage' from: 192.168.86.250:56919

Jul 08 00:16:36 tank125 reef-pi[295]: 2020/07/08 00:16:36 API Request:' GET /api/tcs/2/usage' from: 192.168.86.250:56918

Jul 08 00:16:36 tank125 reef-pi[295]: 2020/07/08 00:16:36 ERROR: stats for id: '2' not found

Jul 08 00:16:36 tank125 reef-pi[295]: 2020/07/08 00:16:36 ERROR: GET /api/tcs/2/usage stats for id: '2' not found

Jul 08 00:16:36 tank125 reef-pi[295]: 2020/07/08 00:16:36 API Request:' GET /api/equipment' from: 192.168.86.250:56917

Jul 08 00:16:36 tank125 reef-pi[295]: 2020/07/08 00:16:36 API Request:' GET /api/atos/current/usage' from: 192.168.86.250:56916

Jul 08 00:16:36 tank125 reef-pi[295]: 2020/07/08 00:16:36 ERROR: stats for id: 'current' not found

Jul 08 00:16:36 tank125 reef-pi[295]: 2020/07/08 00:16:36 ERROR: GET /api/atos/current/usage stats for id: 'current' not found

Jul 08 00:16:36 tank125 reef-pi[295]: 2020/07/08 00:16:36 ERROR: stats for id: '1' not found

Jul 08 00:16:36 tank125 reef-pi[295]: 2020/07/08 00:16:36 ERROR: GET /api/tcs/1/usage stats for id: '1' not found

Jul 08 00:16:36 tank125 reef-pi[295]: 2020/07/08 00:16:36 API Request:' GET /api/atos/2/usage' from: 192.168.86.250:56920

Jul 08 00:16:36 tank125 reef-pi[295]: 2020/07/08 00:16:36 ato sub-system: sensor Ato value: 1

Jul 08 00:16:36 tank125 reef-pi[295]: 2020/07/08 00:16:36 Euipment: 6 On: false

Jul 08 00:16:37 tank125 reef-pi[295]: 2020/07/08 00:16:37 ato sub-system: sensor Ato value: 1

Jul 08 00:16:37 tank125 reef-pi[295]: 2020/07/08 00:16:37 Euipment: 6 On: false

Jul 08 00:16:37 tank125 reef-pi[295]: 2020/07/08 00:16:37 ato sub-system: sensor Overflow value: 0

Jul 08 00:16:37 tank125 reef-pi[295]: 2020/07/08 00:16:37 ERROR: Failed to execute ato control logic. Error: macro is not reversible

Jul 08 00:16:38 tank125 reef-pi[295]: 2020/07/08 00:16:38 ato sub-system: sensor Ato value: 1

Jul 08 00:16:38 tank125 reef-pi[295]: 2020/07/08 00:16:38 Euipment: 6 On: false

Jul 08 00:16:39 tank125 reef-pi[295]: 2020/07/08 00:16:39 ato sub-system: sensor Ato value: 1

Jul 08 00:16:39 tank125 reef-pi[295]: 2020/07/08 00:16:39 Euipment: 6 On: false

Jul 08 00:16:39 tank125 reef-pi[295]: 2020/07/08 00:16:39 API Request:' GET /api/me' from: [2605:a000:1708:21cb:3db4:c6c7:db90:dda2]:57821

Jul 08 00:16:40 tank125 reef-pi[295]: 2020/07/08 00:16:40 ato sub-system: sensor Ato value: 1

Jul 08 00:16:40 tank125 reef-pi[295]: 2020/07/08 00:16:40 Euipment: 6 On: false

Jul 08 00:16:40 tank125 reef-pi[295]: 2020/07/08 00:16:40 ato sub-system: sensor Overflow value: 0

Jul 08 00:16:40 tank125 reef-pi[295]: 2020/07/08 00:16:40 ERROR: Failed to execute ato control logic. Error: macro is not reversible

Jul 08 00:16:41 tank125 reef-pi[295]: 2020/07/08 00:16:41 ato sub-system: sensor Ato value: 1

Jul 08 00:16:41 tank125 reef-pi[295]: 2020/07/08 00:16:41 Euipment: 6 On: false

Jul 08 00:16:42 tank125 reef-pi[295]: 2020/07/08 00:16:42 ato sub-system: sensor Ato value: 1

Jul 08 00:16:42 tank125 reef-pi[295]: 2020/07/08 00:16:42 Euipment: 6 On: false

Jul 08 00:16:43 tank125 reef-pi[295]: 2020/07/08 00:16:43 ato sub-system: sensor Ato value: 1

Jul 08 00:16:43 tank125 reef-pi[295]: 2020/07/08 00:16:43 Euipment: 6 On: false

Jul 08 00:16:43 tank125 reef-pi[295]: 2020/07/08 00:16:43 API Request:' GET /api/me' from: [2605:a000:1708:21cb:3db4:c6c7:db90:dda2]:57821

Jul 08 00:16:43 tank125 reef-pi[295]: 2020/07/08 00:16:43 ato sub-system: sensor Overflow value: 0

Jul 08 00:16:43 tank125 reef-pi[295]: 2020/07/08 00:16:43 ERROR: Failed to execute ato control logic. Error: macro is not reversible

Jul 08 00:16:44 tank125 reef-pi[295]: 2020/07/08 00:16:44 ato sub-system: sensor Ato value: 1

Jul 08 00:16:44 tank125 reef-pi[295]: 2020/07/08 00:16:44 Euipment: 6 On: false

Jul 08 00:16:45 tank125 reef-pi[295]: 2020/07/08 00:16:45 ato sub-system: sensor Ato value: 1

Jul 08 00:16:45 tank125 reef-pi[295]: 2020/07/08 00:16:45 Euipment: 6 On: false

bishoptf · Jul 8, 2020

waynel said:
I downgraded to 3.3.1, but still having trouble with my temp sensors. I have 3 temp sensors connected, but it's only seeing one of those now (the other two are not listed), and the one that does appear isn't working.
Here's some output from the journalctl:

pi@tank125:~ $ sudo journalctl -fu reef-pi.service

-- Logs begin at Tue 2020-07-07 23:41:27 EDT. --

Jul 08 00:16:14 tank125 reef-pi[295]: 2020/07/08 00:16:14 ERROR: GET /api/tcs/2/usage stats for id: '2' not found

Jul 08 00:16:14 tank125 reef-pi[295]: 2020/07/08 00:16:14 API Request:' GET /api/equipment' from: 192.168.86.250:56917

Jul 08 00:16:14 tank125 reef-pi[295]: 2020/07/08 00:16:14 API Request:' GET /api/atos/current/usage' from: 192.168.86.250:56916

Jul 08 00:16:14 tank125 reef-pi[295]: 2020/07/08 00:16:14 ERROR: stats for id: 'current' not found

Jul 08 00:16:14 tank125 reef-pi[295]: 2020/07/08 00:16:14 ERROR: GET /api/atos/current/usage stats for id: 'current' not found

Jul 08 00:16:14 tank125 reef-pi[295]: 2020/07/08 00:16:14 API Request:' GET /api/atos/2/usage' from: 192.168.86.250:56915

Jul 08 00:16:14 tank125 reef-pi[295]: 2020/07/08 00:16:14 ato sub-system: sensor Ato value: 1

Jul 08 00:16:14 tank125 reef-pi[295]: 2020/07/08 00:16:14 Euipment: 6 On: false

Jul 08 00:16:15 tank125 reef-pi[295]: 2020/07/08 00:16:15 ato sub-system: sensor Ato value: 1

Jul 08 00:16:15 tank125 reef-pi[295]: 2020/07/08 00:16:15 Euipment: 6 On: false

Jul 08 00:16:15 tank125 reef-pi[295]: 2020/07/08 00:16:15 lighting subsystem: Setting Light: Lights Channel: White Value: 0

Jul 08 00:16:15 tank125 reef-pi[295]: 2020/07/08 00:16:15 lighting-subsystem: Setting PWM value: 0 at channel: 13

Jul 08 00:16:15 tank125 reef-pi[295]: 2020/07/08 00:16:15 onTime 0 offTime 4096

Jul 08 00:16:15 tank125 reef-pi[295]: 2020/07/08 00:16:15 lighting subsystem: Setting Light: Lights Channel: Blue Value: 0

Jul 08 00:16:15 tank125 reef-pi[295]: 2020/07/08 00:16:15 lighting-subsystem: Setting PWM value: 0 at channel: 14

Jul 08 00:16:15 tank125 reef-pi[295]: 2020/07/08 00:16:15 onTime 0 offTime 4096

Jul 08 00:16:15 tank125 reef-pi[295]: 2020/07/08 00:16:15 API Request:' GET /api/me' from: [2605:a000:1708:21cb:3db4:c6c7:db90:dda2]:57821

Jul 08 00:16:16 tank125 reef-pi[295]: 2020/07/08 00:16:16 ato sub-system: sensor Ato value: 1

Jul 08 00:16:16 tank125 reef-pi[295]: 2020/07/08 00:16:16 Euipment: 6 On: false

Jul 08 00:16:16 tank125 reef-pi[295]: 2020/07/08 00:16:16 ato sub-system: sensor Overflow value: 0

Jul 08 00:16:16 tank125 reef-pi[295]: 2020/07/08 00:16:16 ERROR: Failed to execute ato control logic. Error: macro is not reversible

Jul 08 00:16:17 tank125 reef-pi[295]: 2020/07/08 00:16:17 ato sub-system: sensor Ato value: 1

Jul 08 00:16:17 tank125 reef-pi[295]: 2020/07/08 00:16:17 Euipment: 6 On: false

Jul 08 00:16:18 tank125 reef-pi[295]: 2020/07/08 00:16:18 ato sub-system: sensor Ato value: 1

Jul 08 00:16:18 tank125 reef-pi[295]: 2020/07/08 00:16:18 Euipment: 6 On: false

Jul 08 00:16:19 tank125 reef-pi[295]: 2020/07/08 00:16:19 ato sub-system: sensor Ato value: 1

Jul 08 00:16:19 tank125 reef-pi[295]: 2020/07/08 00:16:19 Euipment: 6 On: false

Jul 08 00:16:19 tank125 reef-pi[295]: 2020/07/08 00:16:19 API Request:' GET /api/me' from: [2605:a000:1708:21cb:3db4:c6c7:db90:dda2]:57821

Jul 08 00:16:19 tank125 reef-pi[295]: 2020/07/08 00:16:19 ato sub-system: sensor Overflow value: 0

Jul 08 00:16:19 tank125 reef-pi[295]: 2020/07/08 00:16:19 ERROR: Failed to execute ato control logic. Error: macro is not reversible

Jul 08 00:16:20 tank125 reef-pi[295]: 2020/07/08 00:16:20 ato sub-system: sensor Ato value: 1

Jul 08 00:16:20 tank125 reef-pi[295]: 2020/07/08 00:16:20 Euipment: 6 On: false

Jul 08 00:16:20 tank125 reef-pi[295]: 2020/07/08 00:16:20 health check: Used memory: 19.4 Load5: 0.29

Jul 08 00:16:21 tank125 reef-pi[295]: 2020/07/08 00:16:21 ato sub-system: sensor Ato value: 1

Jul 08 00:16:21 tank125 reef-pi[295]: 2020/07/08 00:16:21 Euipment: 6 On: false

Jul 08 00:16:22 tank125 reef-pi[295]: 2020/07/08 00:16:22 ato sub-system: sensor Ato value: 1

Jul 08 00:16:22 tank125 reef-pi[295]: 2020/07/08 00:16:22 Euipment: 6 On: false

Jul 08 00:16:22 tank125 reef-pi[295]: 2020/07/08 00:16:22 ato sub-system: sensor Overflow value: 0

Jul 08 00:16:22 tank125 reef-pi[295]: 2020/07/08 00:16:22 ERROR: Failed to execute ato control logic. Error: macro is not reversible

Jul 08 00:16:23 tank125 reef-pi[295]: 2020/07/08 00:16:23 ato sub-system: sensor Ato value: 1

Jul 08 00:16:23 tank125 reef-pi[295]: 2020/07/08 00:16:23 Euipment: 6 On: false

Jul 08 00:16:23 tank125 reef-pi[295]: 2020/07/08 00:16:23 API Request:' GET /api/me' from: [2605:a000:1708:21cb:3db4:c6c7:db90:dda2]:57821

Jul 08 00:16:24 tank125 reef-pi[295]: 2020/07/08 00:16:24 ato sub-system: sensor Ato value: 1

Jul 08 00:16:24 tank125 reef-pi[295]: 2020/07/08 00:16:24 Euipment: 6 On: false

Jul 08 00:16:24 tank125 reef-pi[295]: 2020/07/08 00:16:24 API Request:' GET /api/me' from: 192.168.86.250:56915

Jul 08 00:16:24 tank125 reef-pi[295]: 2020/07/08 00:16:24 API Request:' GET /api/tcs/1/usage' from: 192.168.86.250:56915

Jul 08 00:16:25 tank125 reef-pi[295]: 2020/07/08 00:16:25 API Request:' GET /api/tcs/3/usage' from: 192.168.86.250:56920

Jul 08 00:16:25 tank125 reef-pi[295]: 2020/07/08 00:16:25 ERROR: stats for id: '3' not found

Jul 08 00:16:25 tank125 reef-pi[295]: 2020/07/08 00:16:25 ERROR: GET /api/tcs/3/usage stats for id: '3' not found

Jul 08 00:16:25 tank125 reef-pi[295]: 2020/07/08 00:16:25 API Request:' GET /api/atos/1/usage' from: 192.168.86.250:56919

Jul 08 00:16:25 tank125 reef-pi[295]: 2020/07/08 00:16:25 API Request:' GET /api/tcs/2/usage' from: 192.168.86.250:56918

Jul 08 00:16:25 tank125 reef-pi[295]: 2020/07/08 00:16:25 ERROR: stats for id: '2' not found

Jul 08 00:16:25 tank125 reef-pi[295]: 2020/07/08 00:16:25 ERROR: GET /api/tcs/2/usage stats for id: '2' not found

Jul 08 00:16:25 tank125 reef-pi[295]: 2020/07/08 00:16:25 API Request:' GET /api/equipment' from: 192.168.86.250:56917

Jul 08 00:16:25 tank125 reef-pi[295]: 2020/07/08 00:16:25 API Request:' GET /api/atos/current/usage' from: 192.168.86.250:56916

Jul 08 00:16:25 tank125 reef-pi[295]: 2020/07/08 00:16:25 ERROR: stats for id: 'current' not found

Jul 08 00:16:25 tank125 reef-pi[295]: 2020/07/08 00:16:25 ERROR: GET /api/atos/current/usage stats for id: 'current' not found

Jul 08 00:16:25 tank125 reef-pi[295]: 2020/07/08 00:16:25 ERROR: stats for id: '1' not found

Jul 08 00:16:25 tank125 reef-pi[295]: 2020/07/08 00:16:25 ERROR: GET /api/tcs/1/usage stats for id: '1' not found

Jul 08 00:16:25 tank125 reef-pi[295]: 2020/07/08 00:16:25 API Request:' GET /api/atos/2/usage' from: 192.168.86.250:56920

Jul 08 00:16:25 tank125 reef-pi[295]: 2020/07/08 00:16:25 ato sub-system: sensor Ato value: 1

Jul 08 00:16:25 tank125 reef-pi[295]: 2020/07/08 00:16:25 Euipment: 6 On: false

Jul 08 00:16:25 tank125 reef-pi[295]: 2020/07/08 00:16:25 ato sub-system: sensor Overflow value: 0

Jul 08 00:16:25 tank125 reef-pi[295]: 2020/07/08 00:16:25 ERROR: Failed to execute ato control logic. Error: macro is not reversible

Jul 08 00:16:26 tank125 reef-pi[295]: 2020/07/08 00:16:26 ato sub-system: sensor Ato value: 1

Jul 08 00:16:26 tank125 reef-pi[295]: 2020/07/08 00:16:26 Euipment: 6 On: false

Jul 08 00:16:27 tank125 reef-pi[295]: 2020/07/08 00:16:27 ato sub-system: sensor Ato value: 1

Jul 08 00:16:27 tank125 reef-pi[295]: 2020/07/08 00:16:27 Euipment: 6 On: false

Jul 08 00:16:27 tank125 reef-pi[295]: 2020/07/08 00:16:27 API Request:' GET /api/me' from: [2605:a000:1708:21cb:3db4:c6c7:db90:dda2]:57821

Jul 08 00:16:28 tank125 reef-pi[295]: 2020/07/08 00:16:28 ato sub-system: sensor Ato value: 1

Jul 08 00:16:28 tank125 reef-pi[295]: 2020/07/08 00:16:28 Euipment: 6 On: false

Jul 08 00:16:28 tank125 reef-pi[295]: 2020/07/08 00:16:28 ato sub-system: sensor Overflow value: 0

Jul 08 00:16:28 tank125 reef-pi[295]: 2020/07/08 00:16:28 ERROR: Failed to execute ato control logic. Error: macro is not reversible

Jul 08 00:16:29 tank125 reef-pi[295]: 2020/07/08 00:16:29 ato sub-system: sensor Ato value: 1

Jul 08 00:16:29 tank125 reef-pi[295]: 2020/07/08 00:16:29 Euipment: 6 On: false

Jul 08 00:16:30 tank125 reef-pi[295]: 2020/07/08 00:16:30 ato sub-system: sensor Ato value: 1

Jul 08 00:16:30 tank125 reef-pi[295]: 2020/07/08 00:16:30 Euipment: 6 On: false

Jul 08 00:16:31 tank125 reef-pi[295]: 2020/07/08 00:16:31 ato sub-system: sensor Ato value: 1

Jul 08 00:16:31 tank125 reef-pi[295]: 2020/07/08 00:16:31 Euipment: 6 On: false

Jul 08 00:16:31 tank125 reef-pi[295]: 2020/07/08 00:16:31 API Request:' GET /api/me' from: [2605:a000:1708:21cb:3db4:c6c7:db90:dda2]:57821

Jul 08 00:16:31 tank125 reef-pi[295]: 2020/07/08 00:16:31 ato sub-system: sensor Overflow value: 0

Jul 08 00:16:31 tank125 reef-pi[295]: 2020/07/08 00:16:31 ERROR: Failed to execute ato control logic. Error: macro is not reversible

Jul 08 00:16:32 tank125 reef-pi[295]: 2020/07/08 00:16:32 ato sub-system: sensor Ato value: 1

Jul 08 00:16:32 tank125 reef-pi[295]: 2020/07/08 00:16:32 Euipment: 6 On: false

Jul 08 00:16:33 tank125 reef-pi[295]: 2020/07/08 00:16:33 ato sub-system: sensor Ato value: 1

Jul 08 00:16:33 tank125 reef-pi[295]: 2020/07/08 00:16:33 Euipment: 6 On: false

Jul 08 00:16:34 tank125 reef-pi[295]: 2020/07/08 00:16:34 ato sub-system: sensor Ato value: 1

Jul 08 00:16:34 tank125 reef-pi[295]: 2020/07/08 00:16:34 Euipment: 6 On: false

Jul 08 00:16:34 tank125 reef-pi[295]: 2020/07/08 00:16:34 ato sub-system: sensor Overflow value: 0

Jul 08 00:16:34 tank125 reef-pi[295]: 2020/07/08 00:16:34 ERROR: Failed to execute ato control logic. Error: macro is not reversible

Jul 08 00:16:35 tank125 reef-pi[295]: 2020/07/08 00:16:35 ato sub-system: sensor Ato value: 1

Jul 08 00:16:35 tank125 reef-pi[295]: 2020/07/08 00:16:35 Euipment: 6 On: false

Jul 08 00:16:35 tank125 reef-pi[295]: 2020/07/08 00:16:35 API Request:' GET /api/health_stats' from: 192.168.86.250:56916

Jul 08 00:16:35 tank125 reef-pi[295]: 2020/07/08 00:16:35 API Request:' GET /api/me' from: 192.168.86.250:56915

Jul 08 00:16:35 tank125 reef-pi[295]: 2020/07/08 00:16:35 API Request:' GET /api/me' from: [2605:a000:1708:21cb:3db4:c6c7:db90:dda2]:57821

Jul 08 00:16:35 tank125 reef-pi[295]: 2020/07/08 00:16:35 API Request:' GET /api/tcs/1/usage' from: 192.168.86.250:56915

Jul 08 00:16:36 tank125 reef-pi[295]: 2020/07/08 00:16:36 API Request:' GET /api/tcs/3/usage' from: 192.168.86.250:56920

Jul 08 00:16:36 tank125 reef-pi[295]: 2020/07/08 00:16:36 ERROR: stats for id: '3' not found

Jul 08 00:16:36 tank125 reef-pi[295]: 2020/07/08 00:16:36 ERROR: GET /api/tcs/3/usage stats for id: '3' not found

Jul 08 00:16:36 tank125 reef-pi[295]: 2020/07/08 00:16:36 API Request:' GET /api/atos/1/usage' from: 192.168.86.250:56919

Jul 08 00:16:36 tank125 reef-pi[295]: 2020/07/08 00:16:36 API Request:' GET /api/tcs/2/usage' from: 192.168.86.250:56918

Jul 08 00:16:36 tank125 reef-pi[295]: 2020/07/08 00:16:36 ERROR: stats for id: '2' not found

Jul 08 00:16:36 tank125 reef-pi[295]: 2020/07/08 00:16:36 ERROR: GET /api/tcs/2/usage stats for id: '2' not found

Jul 08 00:16:36 tank125 reef-pi[295]: 2020/07/08 00:16:36 API Request:' GET /api/equipment' from: 192.168.86.250:56917

Jul 08 00:16:36 tank125 reef-pi[295]: 2020/07/08 00:16:36 API Request:' GET /api/atos/current/usage' from: 192.168.86.250:56916

Jul 08 00:16:36 tank125 reef-pi[295]: 2020/07/08 00:16:36 ERROR: stats for id: 'current' not found

Jul 08 00:16:36 tank125 reef-pi[295]: 2020/07/08 00:16:36 ERROR: GET /api/atos/current/usage stats for id: 'current' not found

Jul 08 00:16:36 tank125 reef-pi[295]: 2020/07/08 00:16:36 ERROR: stats for id: '1' not found

Jul 08 00:16:36 tank125 reef-pi[295]: 2020/07/08 00:16:36 ERROR: GET /api/tcs/1/usage stats for id: '1' not found

Jul 08 00:16:36 tank125 reef-pi[295]: 2020/07/08 00:16:36 API Request:' GET /api/atos/2/usage' from: 192.168.86.250:56920

Jul 08 00:16:36 tank125 reef-pi[295]: 2020/07/08 00:16:36 ato sub-system: sensor Ato value: 1

Jul 08 00:16:36 tank125 reef-pi[295]: 2020/07/08 00:16:36 Euipment: 6 On: false

Jul 08 00:16:37 tank125 reef-pi[295]: 2020/07/08 00:16:37 ato sub-system: sensor Ato value: 1

Jul 08 00:16:37 tank125 reef-pi[295]: 2020/07/08 00:16:37 Euipment: 6 On: false

Jul 08 00:16:37 tank125 reef-pi[295]: 2020/07/08 00:16:37 ato sub-system: sensor Overflow value: 0

Jul 08 00:16:37 tank125 reef-pi[295]: 2020/07/08 00:16:37 ERROR: Failed to execute ato control logic. Error: macro is not reversible

Jul 08 00:16:38 tank125 reef-pi[295]: 2020/07/08 00:16:38 ato sub-system: sensor Ato value: 1

Jul 08 00:16:38 tank125 reef-pi[295]: 2020/07/08 00:16:38 Euipment: 6 On: false

Jul 08 00:16:39 tank125 reef-pi[295]: 2020/07/08 00:16:39 ato sub-system: sensor Ato value: 1

Jul 08 00:16:39 tank125 reef-pi[295]: 2020/07/08 00:16:39 Euipment: 6 On: false

Jul 08 00:16:39 tank125 reef-pi[295]: 2020/07/08 00:16:39 API Request:' GET /api/me' from: [2605:a000:1708:21cb:3db4:c6c7:db90:dda2]:57821

Jul 08 00:16:40 tank125 reef-pi[295]: 2020/07/08 00:16:40 ato sub-system: sensor Ato value: 1

Jul 08 00:16:40 tank125 reef-pi[295]: 2020/07/08 00:16:40 Euipment: 6 On: false

Jul 08 00:16:40 tank125 reef-pi[295]: 2020/07/08 00:16:40 ato sub-system: sensor Overflow value: 0

Jul 08 00:16:40 tank125 reef-pi[295]: 2020/07/08 00:16:40 ERROR: Failed to execute ato control logic. Error: macro is not reversible

Jul 08 00:16:41 tank125 reef-pi[295]: 2020/07/08 00:16:41 ato sub-system: sensor Ato value: 1

Jul 08 00:16:41 tank125 reef-pi[295]: 2020/07/08 00:16:41 Euipment: 6 On: false

Jul 08 00:16:42 tank125 reef-pi[295]: 2020/07/08 00:16:42 ato sub-system: sensor Ato value: 1

Jul 08 00:16:42 tank125 reef-pi[295]: 2020/07/08 00:16:42 Euipment: 6 On: false

Jul 08 00:16:43 tank125 reef-pi[295]: 2020/07/08 00:16:43 ato sub-system: sensor Ato value: 1

Jul 08 00:16:43 tank125 reef-pi[295]: 2020/07/08 00:16:43 Euipment: 6 On: false

Jul 08 00:16:43 tank125 reef-pi[295]: 2020/07/08 00:16:43 API Request:' GET /api/me' from: [2605:a000:1708:21cb:3db4:c6c7:db90:dda2]:57821

Jul 08 00:16:43 tank125 reef-pi[295]: 2020/07/08 00:16:43 ato sub-system: sensor Overflow value: 0

Jul 08 00:16:43 tank125 reef-pi[295]: 2020/07/08 00:16:43 ERROR: Failed to execute ato control logic. Error: macro is not reversible

Jul 08 00:16:44 tank125 reef-pi[295]: 2020/07/08 00:16:44 ato sub-system: sensor Ato value: 1

Jul 08 00:16:44 tank125 reef-pi[295]: 2020/07/08 00:16:44 Euipment: 6 On: false

Jul 08 00:16:45 tank125 reef-pi[295]: 2020/07/08 00:16:45 ato sub-system: sensor Ato value: 1

Jul 08 00:16:45 tank125 reef-pi[295]: 2020/07/08 00:16:45 Euipment: 6 On: false

I would try deleting all of the references and re-creating them, delete them from the dashboard etc and start over and see when you try to create them if it see's all of the probes. You can also try adding one probe at a time etc, to narrow down if its one probe thats causing an issue.

The more I think about it I would remove the database and start clean, see if the issues remain or change. I didn't look in your build thread but are you using a pi-hat pre-built or did you build this one from scratch?

:)

waynel · Jul 8, 2020

Tom Bishop said:
I would try deleting all of the references and re-creating them, delete them from the dashboard etc and start over and see when you try to create them if it see's all of the probes. You can also try adding one probe at a time etc, to narrow down if its one probe thats causing an issue.

The more I think about it I would remove the database and start clean, see if the issues remain or change. I didn't look in your build thread but are you using a pi-hat pre-built or did you build this one from scratch?

:)

I'm using the ML reef-pi hat, with these temp probes: Amazon product

I'll delete the db and start fresh and see what that does.

bishoptf · Jul 8, 2020

waynel said:
I'm using the ML reef-pi hat, with these temp probes: Amazon product

I'll delete the db and start fresh and see what that does.

I am also running a ML hat, and so far things have been really stable for my last build. I will look though your build thread and see if you have called out what kind of connections you are using for things. Hopefully starting over will start things working!

:)

waynel · Jul 8, 2020

waynel said:
I'm using the ML reef-pi hat, with these temp probes: Amazon product

I'll delete the db and start fresh and see what that does.

I deleted the .db and reconfigured, and everything is working correctly now, as far as I can tell. I'll monitor the temps and ATO and hope for the best!

buddy. · Jul 9, 2020

waynel said:
I deleted the .db and reconfigured, and everything is working correctly now, as far as I can tell. I'll monitor the temps and ATO and hope for the best!

I used to get the problems you were having with your temp probes a lot. Things that caused it were my lights and heaters turning on and even turning on a treadmill caused it!
This was in an old house. I have since moved to a brand new house and it is no longer happening so I put it down to old/bad house wiring.

Bob Tiffany · Jul 9, 2020

Ok so this may be a dumb question, but here goes lol on the health block on the dashboard (CPU/Memory current), what do these numbers represent exactly? My current CPU usage says 0.86, what is that number? Memory says 9.95, is that 9.95MB? Thanks!!

bishoptf · Jul 9, 2020

Bob Tiffany said:
Ok so this may be a dumb question, but here goes lol on the health block on the dashboard (CPU/Memory current), what do these numbers represent exactly? My current CPU usage says 0.86, what is that number? Memory says 9.95, is that 9.95MB? Thanks!!

Can you post a screenshot of your CPU/Memory readout? CPU readout is in percentage, what Pi hardware version are you using?