reefbreeder photon v2 LED

[reef tank 2.0]

over the past week or two, I have noticed that my V2 has a rapid green flashing light on the right side. I have unplugged the light and it still remains. I believe this indicates that it is not connecting to wifi. (I think). I tried opening the app and it is not connecting to the light either. The light goes off/on per the schedule I set over a year ago. how do you go about reconnecting the light to wifi if you cant access the app? anyone else run into this?

 

[exnisstech]

DO NOT RESET THE LIGHTS!
Are you running the new reefbreeder app or the older Reef Nexus app? If your on the new app I would reach out to support for assistance. If your still on the old app you may need to replace a board in the lights to be able to connect to the new app. Either way if you reset the light before you can communicate with them you will not be able to make changes and the lights may go to 100% .
There's some info in the thread below.

PS. You are correct the light should be solid when connected to Wi-Fi

Reef Breeders Bricked

Got a new phone thought nothing of it. Tried to use old app and it wont allow me to sign in stating there is no internet connection. Downloaded new app. Trying to connect. Keep getting certificate transfer error. All lights now stuck on full blast no cycle. I dont see any documentation on...

www.reef2reef.com

 

[reef tank 2.0]

thank you for that!

 

[Biff0rz]

If mine lose power or wifi, they blink green. Re-bind them if they don't auto connect back.

 

[legacy2mj]

My light does not have a schedule or connected to my app. Which is what I’m trying to do. But the light is solid GREEN.

I’m trying to locate this reset button (pre 2025) but I can’t find it. Sometimes I get lucky poking around In there and the LED indicator will cycle RED, flashing BLUE for like 3 seconds… then right back to solid green.

I can pull up the WIfI signal it’s emitting on my phone, but using that I cannot add the device to my app.

I’d be happy with a full blown reset to get the indicator to flashing blue, because I basically am setting it up from scratch at the moment.