Here are my 8 Reefi Unos. Amazing lights, everything pops!
Here are my 8 Reefi Unos. Amazing lights, everything pops!
Beautiful tank!!
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Here are my 8 Reefi Unos. Amazing lights, everything pops!
Here are my 8 Reefi Unos. Amazing lights, everything pops!
Looks awesome! That's really deep front to back NICE. I have 8 for a new DT which will be 60" wide 28" front to back and 24" tall. I am thinking 2 centered 20" apart and then 3 towards the front and 3 towards the back like you have. I may tweak slightly and have the outer 2 on each side a little more towards the sides of the tank after watching the BRS videos on light placements.Added 2 more Unos... now running 6 on a 48"x35"x20". Love how I can change the front to rear spread as opposed to having a fixed 2 puck design. I can really cover the whole depth of the tank now...have sps from front to back. The T slots in the 2040 mounts hide the wires well too.
That’s a nice tank. I have 2 on my 48x20 and it’s perfect! 6 on your tank is definitely plenty.How many Uno would you recommend for an SPS dominated reef tank that's 72" X 48" X 13" tall?
Thank you! What mounting height do you recommend?That’s a nice tank. I have 2 on my 48x20 and it’s perfect! 6 on your tank is definitely plenty
Thank you! What mounting height do you recommend?
Those Tenuis videos look familiar
Thank you! 6 vs 2? you mean 2 for48" X 24" area right?I have it at 10.5inch above the water. Here is the PAR reading with Default LPS Photo Mode at 148W per light, which is ~80% of the max power. With 6 Unos versus 2, you'll have more overlap and higher PAR reading. My tank is 16inch deep, and the Top of the rock, versus glass bottom is maybe 6inch. Hope this helps.
I have 2. I suggested 6 for your tank since its so much larger based on 1 for each 24x24 area.Thank you! 6 vs 2? you mean 2 for48" X 24" area right?
Dana posted a photo on page 2 and estimates it's around 14000k lookingDoes anyone run the reef fi lights with all channels equal/maxed? I’d be very interested to see some results under that scenario
Dana posted a photo on page 2 and estimates it's around 14000k looking
any recommendation on where to purchase 2040? I am always so overwhelmed with all the parts and t slot sizes when I go on some of those sites. What do you recommend I get? Thank you!I mounted mine a little high because I made a miscalculation when I ordered the 2040 aluminum. It is about 12.5 inches above the water in this picture. When I put them over my sps I will go for 10 or 11 inches.
any recommendation on where to purchase 2040? I am always so overwhelmed with all the parts and t slot sizes when I go on some of those sites. What do you recommend I get? Thank you!