retrofit t5 troubleshoot

  • Thread starter Thread starter downset21
  • Start date Start date
  • Tagged users Tagged users None

downset21

Community Member
View Badges
Joined
Jan 13, 2016
Messages
57
Reaction score
29
Rating - 0%
0   0   0
Hello,

I installed a retrofit 2x80watt t5 setup about a year ago. It is the retrokit that BRS sells. I have replaced the bulbs once already and that was in the winter.

The problem I am having is that one bulb is flickering for a moment but the two t5s will not turn on. They are connected to an apex controller and I've tried to turn them on and off. The same result happens every time.

Could the ballast have gone bad already? Why would only one bulb fire for a moment while the other doesn't light up at all? What are your thoughts?
 
Hello,

I installed a retrofit 2x80watt t5 setup about a year ago. It is the retrokit that BRS sells. I have replaced the bulbs once already and that was in the winter.

The problem I am having is that one bulb is flickering for a moment but the two t5s will not turn on. They are connected to an apex controller and I've tried to turn them on and off. The same result happens every time.

Could the ballast have gone bad already? Why would only one bulb fire for a moment while the other doesn't light up at all? What are your thoughts?
Double check that you have a good connection at the bulb. If one bulb has a bad connection and is flickering itll cut power to the other bulb. At least that's what my fixture does. Take the bulbs out, double check all the connections, and reinstall them and see if that helps. If not it may be a bad ballast or faulty bulbs.
 
The connections seem good to my untrained eye. I tried a new bulb on the one that flickered. As I was checking the connection of the bulb that didnt turn on at all, the one that flickered a couple of more times, which is a new development. Any thoughts?
 
The connections seem good to my untrained eye. I tried a new bulb on the one that flickered. As I was checking the connection of the bulb that didnt turn on at all, the one that flickered a couple of more times, which is a new development. Any thoughts?
Sounds like a connection issue somewhere. You jiggle one thing and another one happens.
 

TOP 10 Trending Threads

WHEN NUISANCE ALGAE OR CYANO FIRST APPEARS, WHAT DO YOU DO FIRST?

  • Manually remove it and observe

    Votes: 3 15.0%
  • Retest nutrients and other parameters

    Votes: 2 10.0%
  • Adjust flow or lighting

    Votes: 0 0.0%
  • Reduce or change feeding

    Votes: 0 0.0%
  • Add or strengthen the cleanup crew

    Votes: 4 20.0%
  • Improve filtration or nutrient export

    Votes: 0 0.0%
  • Use a targeted treatment

    Votes: 0 0.0%
  • Wait and let the tank find its balance

    Votes: 8 40.0%
  • Phone a friend...

    Votes: 0 0.0%
  • It depends (explain in the comments)

    Votes: 3 15.0%
Back
Top
Home
Post thread…
Market
What's new