Return Pump Help

Grimreefer13

New Member
View Badges
Joined
Aug 31, 2019
Messages
9
Reaction score
1
What state or country do you live in
Maryland
Rating - 0%
0   0   0
Hello this is my first post on this forum. Some Background, second saltwater tank but my first setup with a sump(tank is a 29 rimless and my sump is a custom 20 gal. I have a hang on the back overflow rated at i believe 300 gph. Im running a jecod DCS 1200 which can pump 317gph.

Well anyway on to my question i woke up this morning to my display tank around 5 degrees cooler than my sump, and noticed the overflow not taking down as much water as usual. first thing i checked was the return pump made sure nothing was blocking it. Started the pump back up and the water was coming out at best as a trickle. Should i give it more cleaning or try a new pump?
Thanks ahead of time
 
Hello this is my first post on this forum. Some Background, second saltwater tank but my first setup with a sump(tank is a 29 rimless and my sump is a custom 20 gal. I have a hang on the back overflow rated at i believe 300 gph. Im running a jecod DCS 1200 which can pump 317gph.

Well anyway on to my question i woke up this morning to my display tank around 5 degrees cooler than my sump, and noticed the overflow not taking down as much water as usual. first thing i checked was the return pump made sure nothing was blocking it. Started the pump back up and the water was coming out at best as a trickle. Should i give it more cleaning or try a new pump?
Thanks ahead of time
Sounds like the pump isn't running at full capacity. I'd tear it down and give it a good clean through. Could be something in the impeller housing causing it to not spin freely.
 
Thanks for the quick reply !
Threw a spare heater in my display and will try and give a real good cleaning like you said, update soon
 
Hello this is my first post on this forum. Some Background, second saltwater tank but my first setup with a sump(tank is a 29 rimless and my sump is a custom 20 gal. I have a hang on the back overflow rated at i believe 300 gph. Im running a jecod DCS 1200 which can pump 317gph.

Well anyway on to my question i woke up this morning to my display tank around 5 degrees cooler than my sump, and noticed the overflow not taking down as much water as usual. first thing i checked was the return pump made sure nothing was blocking it. Started the pump back up and the water was coming out at best as a trickle. Should i give it more cleaning or try a new pump?
Thanks ahead of time
I would do the clean out of the old pump first.
Hopefully that will get it going.
jecod/jeboa are cheap chinese made pumps that generally don't hold up well.
This might be a good opportunity to do some research for a new pump.
Think of it as a upgrade.
 
Thanks guys! Had to take it apart and clear some stuff out a second time but I got it back up. Just didn’t have the cash at the time to shell out for the pump at the time but thanks for the advice I will add that to my research list !
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.9%
  • Fish or coral food

    Votes: 5 5.6%
  • Test kits or reagents

    Votes: 9 10.0%
  • Filter media or replacement fleece

    Votes: 5 5.6%
  • RO/DI filters or supplies

    Votes: 14 15.6%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 11.1%
  • I keep a backup of everything

    Votes: 23 25.6%
  • Other (Post in the comments)

    Votes: 7 7.8%
Back
Top
Home
Post thread…
Market
What's new