Return pump issue.

  • Thread starter Thread starter Reef.
  • Start date Start date
  • Tagged users Tagged users None

Reef.

5000 Club Member
View Badges
Joined
Mar 12, 2019
Messages
5,364
Reaction score
3,908
Rating - 0%
0   0   0
Was messing about with my return pump, a Sicce 1.0, trying to make it less noisy, it has now stopped working, so I tried the spare return I had, a Eheim 1000 but it did the same, what’s going on?

I’ve tried turning them off, leaving for 10-15 minutes,, tried shaking all the bubbles out of them, still no joy.
 
Last edited:
Couple of questions - are they connected to a controller of some sort? might that controller be in feed mode?

I'ld take pump(s) in question dump them in bucket of RO water and plug them in and see if they run there for starters.
 
Couple of questions - are they connected to a controller of some sort? might that controller be in feed mode?

I'ld take pump(s) in question dump them in bucket of RO water and plug them in and see if they run there for starters.

No controller, I have the spare in the sink, trying it there, ran for half a second then nothing.
 
Ok, pull them apart and check to make sure there's nothing clogging them up. If you have some vegetable glycerin you can lube them with that or soak in vinegar or better citric acid. What kind of pumps are these?
 
Ok, pull them apart and check to make sure there's nothing clogging them up. If you have some vegetable glycerin you can lube them with that or soak in vinegar or better citric acid. What kind of pumps are these?

The main is a Sicce 1.0 and the spare is a Eheim compact 1000, I can’t see it being a cleaning issue as they are less than a month old.

Edit it was a cleaning issue sort off, thought I was being rude, asking for help but not following the advice, so pulled them apart, replaced the propellers, both working great now thanks!
 
Last edited:
This is a perfect thread! Thanks for e
The main is a Sicce 1.0 and the spare is a Eheim compact 1000, I can’t see it being a cleaning issue as they are less than a month old.

Edit it was a cleaning issue sort off, thought I was being rude, asking for help but not following the advice, so pulled them apart, replaced the propellers, both working great now thanks!
This is a perfect thread! Thanks for editing your last with the correction. So few do in these situations and it's such a great learning opportunity for others.
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.9%
  • Fish or coral food

    Votes: 5 5.6%
  • Test kits or reagents

    Votes: 9 10.0%
  • Filter media or replacement fleece

    Votes: 5 5.6%
  • RO/DI filters or supplies

    Votes: 14 15.6%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 11.1%
  • I keep a backup of everything

    Votes: 23 25.6%
  • Other (Post in the comments)

    Votes: 7 7.8%
Back
Top
Home
Post thread…
Market
What's new