Can you post photos of all your tubing connections? Almost seems like your collecting the waste and dumping the RO?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
The front tube from the right canister is
ok so water is coming out of the center cartridge and going into the back of the 3rd cartridge on the right and exiting the front in the photo and then going to right side of RO cartridge? Blue lineThe third canister the exit is on the right side, behind the gray wire see the blue tubing, it goes up and loops around back into the RO filter, the top elbow, the bottom elbow is the waste.
The left side the blue tube is the water to the DI filter.
The red tubing is the water coming from the hose bib.
Agreed. The "entry" line for the membrane is on the left in your photo. The 2 "exits" are on the right-one goes to waste and one goes to the DI cartridge.If I am following your flow correctly, you have source water from the prefilters going into to RO out line. The source water goes into the RO housing on the single connector side where the end screws off. Left side in the photo
Do you need to have the unit running while you are gone? If not, my recommendation is to forget about it for now, and enjoy your tripOk I will give that a try. I will have to look at the photos again. I will let you know, of course I am going on vacation tomorrow am, so I guess it will be tonight.
Hope you have a great vacation!So I inspected my two DI reactors the first one seems ok that is a speatrapure DI pre made filter, the second one is a BRS fill your own with the bottom screw, I seem to have a internal leak with that one. looks like a steam of water inside the clear housing.
Looks like I will have to pull the second DI and put in a pre filled one for now.
Typical go on vacation and bad luck in already here.