RODI diagram, I’m lost

[West1]

I recently moved and had this RODI with drinking water. I no longer need the drinking water and will use this strictly for RODI.

black line on lower left is Tap water from sink.
Blue line above was to 2.5gl storage water and above blue line is to DI (with shutoff valve).
Do I completely remove the top vertical filter as that connected the storage water to the outlet on the right of the system?

thanks for the help all

 

[01xp]

I would remove the top filter entirely

 

[Ludders]

You're referring to that T which splits right? If that the case, yes it should just feed from the membrane to the DI canister and then out.

 

[West1]

You're referring to that T which splits right? If that the case, yes it should just feed from the membrane to the DI canister and then out.

correct. I remove the top filter and the T, right?

I purchased a flush kit too. I need to search my emails for the diagram on where to place that puppy.

 

[Ludders]

I'll draw up a picture shortly to save confusion

 

[West1]

I'll draw up a picture shortly to save confusion

Oh awesome, ty!!

 

[Ludders]

Not sure what that horizontal canister is above the membrane, it's probably something to put trace elements back into the water for drinking, so I think you should remove that.

This is what your basic flow should be like. Some people have multiple stages, but for the purposes of demonstrating the flow this should help you.

 

[West1]

Not sure what that horizontal canister is above the membrane, it's probably something to put trace elements back into the water for drinking, so I think you should remove that.

This is what your basic flow should be like. Some people have multiple stages, but for the purposes of demonstrating the flow this should help you.

tyvm.
I am filling up 2 40gl reservoirs :)

 

[01xp]

Okay depending on the size of the membrane you might be there for a little

 

[Ludders]

Okay depending on the size of the membrane you might be there for a little

at least 24 hours probably a bit more

 

[West1]

Those who have a booster pump kit, how long does the booster pump stay on once the float valve is activated?

pressure switch is between DI cartridge and DI reservoir. Ty