RODI unit questions

Fishingandreefing

2500 Club Member
View Badges
Joined
Nov 7, 2019
Messages
3,839
Reaction score
1,798
What state or country do you live in
Maryland
Rating - 0%
0   0   0
Merry Christmas to everyone!

So I got an Aquatic Life 100GPD rodi Unit since April of 2018. I replaced the first two stages, sediment and carbon filters a couple months ago. The TDS reading is at or below 4.

according to aquatic life I don’t need to replace the rest till reading of 5 or more.

it usually takes almost 2 hours to produce a bucket. Isn’t it too slow compare to the 100GPD and I need to replace rest of the filters?

100 gallon divided by 24 hours = 4.17 gallon per hour?
 
Take a look at the ratings on the RO membrane. They are usually 50 or 60# at 77F. Plus there's back pressure and yes TDS. Rarely will you find someone hit the rated production due to those prerequisites. I usually fill about 10 gallons in 3.5 hours.

Is that 4 TDS output of whole system or just the pre DI stages? Seems a tad high if you're taking output of DI resin beds.
 
Last edited:
Take a look at the ratings on the RO membrane. They are usually 50 or 60# at 77F. Plus there's back pressure and yes TDS. Rarely will you find someone hit the rated production due to those prerequisites. I usually fill about 10 gallons in 3.5 hours.

Is that 4 TDS output of whole system or just the pre DI stages? Seems a tad high if you're taking output of DI resin beds.

4 is with all the stages installed. The membrane and DI will be two year in April.
 
4 is with all the stages installed. The membrane and DI will be two year in April.
4 is probably fine, I'm usually not usually OCD about anything, but if my RODI is going into storage/saltwater mixing over 0 I'm finding out why in short order.

I have a 3 stage DI resin and I burn through anion much faster than cation or mixed and am replacing it every 200-300 gallons (that's about 2-3 months for me). It's color changing so easy to tell. After 7 months I have yet to replace the cation or mixed bed (and actually, they only have a minimum of color change and should last another year or more).
 
4 tds is high, you should be getting 0 tds in your final product water. What kind of PSI are you getting going to the unit? If you’re below 60ish you may want to get/look into a booster pump. I’ve never used/saw the Aquatic life ro system so I don’t know their exact specs.
 
4 is probably fine, I'm usually not usually OCD about anything, but if my RODI is going into storage/saltwater mixing over 0 I'm finding out why in short order.

I have a 3 stage DI resin and I burn through anion much faster than cation or mixed and am replacing it every 200-300 gallons (that's about 2-3 months for me). It's color changing so easy to tell. After 7 months I have yet to replace the cation or mixed bed (and actually, they only have a minimum of color change and should last another year or more).

I will wait till reach 5 or till April for total of 2 years for the replacement. Just don’t want to throw away $60 because it’s slightly high and lower produce rate.
 
4 tds is high, you should be getting 0 tds in your final product water. What kind of PSI are you getting going to the unit? If you’re below 60ish you may want to get/look into a booster pump. I’ve never used/saw the Aquatic life ro system so I don’t know their exact specs.
4 is high really? I would say 1 hour 45 mins for a bucket
 
I will wait till reach 5 or till April for total of 2 years for the replacement. Just don’t want to throw away $60 because it’s slightly high and lower produce rate.
I get that. Part of it's my water...very high TDS and whatever is burning through Anion. I was having to replace a two staged mixed every 2 months or less, that was getting pricey.
 
Just replaced the DI cartridge and checked it was only like $20 I paid. According to Aquaticlife DI needs to be replaced a lot sooner or the color is completely changed.

now flow rate is about the same but 0 TDS

Just flushed the first half gallon and it was good to go!

6F5DD173-F921-4355-ACFF-B7D5DE78D34B.jpeg 7EC68D26-31D2-4F52-B7EC-3AC0D520451E.jpeg
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.7%
  • Fish or coral food

    Votes: 5 5.5%
  • Test kits or reagents

    Votes: 9 9.9%
  • Filter media or replacement fleece

    Votes: 5 5.5%
  • RO/DI filters or supplies

    Votes: 14 15.4%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 11.0%
  • I keep a backup of everything

    Votes: 24 26.4%
  • Other (Post in the comments)

    Votes: 7 7.7%
Back
Top
Home
Post thread…
Market
What's new