Roller Filter Product Testers Wanted

[b1llvance]

Is this still a thing? I am setting up a brand new 125g and moving my red sea 1200 reefmat over to it. I would love to use this product from the get go.

 

[teaktoc]

Yes! Send me the address and I'll send you a sample (maybe more) now. They can be ordered in the future: Gaia-reef.com.

BTW, there is about 180% of the roll length compared with the RedSea Reefmat 1200. We have experimented with setting a custom length on the roll replacement settings to about 70 M. It seems to be close.

 

[Rolliad]

I use a ReefMat 250 - do you have anything in that range that you need testing?

 

[teaktoc]

That size should be available in a few more months. We have, luckily, calibrated the rollers and trimmers to manufacture a selection from the nano to the 1200 - including 250 and 500. Just waiting on supplies at this point.

 

[Rolliad]

If you need a tester when available - hit me up!

 

[vandy]

Running a Klir 7 with a 4.5” roll

 

[teaktoc]

Running a Klir 7 with a 4.5” roll

The current batch is about 7" wide. What is your diameter? I can add that to the production cuts.

 

[vandy]

The current batch is about 7" wide. What is your diameter? I can add that to the production cuts.

Diameter of the roll or the cardboard roll inside?

 

[teaktoc]

Outer of roll itself and the cardboard inner would be ideal, actually.

 

[vandy]

Outer of roll itself and the cardboard inner would be ideal, actually.

I just ordered some new rolls. I’ll get you those measurements once they get in so you have unused widths

 

[rc1]

I can test the reefmat 1200 roller, I run the 500 roll

 

[tsharpe291]

clarisea 3000 gen 3

 

[joshwaggs]

I have the reefmat 250. I didn’t see that one on the list. Feel free to message me if you still need people.

 

[ShakeyGizzard]

Outer of roll itself and the cardboard inner would be ideal, actually.

your best bet is to give the outer diameter of what you have along with the size of the inner roll, I sent my roll specs months ago with no response. its obvious you are waiting on someone who has the measurements that fit what you have that you can cut to width.

 

[Rothric]

I'm using a Clarisea SK3000 Gen 3 if you have any that fit

 

[Snoopy 67]

Getting ready to change my roll in a day or so --
Reef Factory M
New roll OD -- 5.25
Inner Tube ID -- 1.125

 

[Joe's Coral Reef]

I use 187mm wide x 35m long, 40g/m2, fleece / Non-woven roll

 

[Snoopy 67]

:rolleyes:
I guess the width should be included too--7.875"

 

[teaktoc]

I have the reefmat 250. I didn’t see that one on the list. Feel free to message me if you still need people.

Hopefully by mid Q1 2025 - in a few months or sooner we are shipping sizes for nano, 250, 500 and 1200.

 

[teaktoc]

I use 187mm wide x 35m long, 40g/m2, fleece / Non-woven roll

While the Gaia Fleece 17 is 17cm (170MM) wide, it should certainly fit and last twice as long, the inner screen size of your roller mat needs to be narrow enough (less than 17cm wide) where the water passes-through to ensure everything is filtered well.

DM me your address and I’ll send a roll!