Salinity probe stopped working

Shawn_epicurious

Valuable Member
View Badges
Joined
Mar 1, 2020
Messages
1,721
Reaction score
2,896
What state or country do you live in
Texas
Rating - 0%
0   0   0
I was productive today. I setup my Neptune today. Made some progress, things went okay and then my salinity probe stopped reading. It went to zero and stayed there. Is there an easy fix?
211C25A6-6296-4657-90FC-E847E654B8CB.png
 
They seem to last about 1-2 years for alot of people. Is this a new or old APEX set up? Also, I know this sounds dumb, but is it actually submersed? My ATO failed to refill once, leaving my probe out of water, and I started troubleshooting the probe before even looking to see if it was in water lol.

Edit- I think you might need try recalibrating. I see your salinity hit almost 44 when it should be around 35. That steady rise makes me think something else is happening.
 
Also, be sure there are no air bubble in the open area at the bottom, those can lead to some wacky stuff.
 
there pretty pricy to only last that long
Agreed. Some people get several years, some report early failure. It is tough to say why since there is no baseline to what condition they are kept in. Yours does seem premature since it is not in the 2 year mark yet. I would think a disconnect, cleaning, then reconnect/calibration for you might solve some problems.
 
They seem to last about 1-2 years for alot of people. Is this a new or old APEX set up? Also, I know this sounds dumb, but is it actually submersed? My ATO failed to refill once, leaving my probe out of water, and I started troubleshooting the probe before even looking to see if it was in water lol.

Edit- I think you might need try recalibrating. I see your salinity hit almost 44 when it should be around 35. That steady rise makes me think something else is happening.
Is it supposed to be totally submersed, or just the bottom half?
FBEA48FA-DCF9-4AA9-96A9-D8526CB1ADA7.jpeg
 
Is it supposed to be totally submersed, or just the bottom half?
Just the bottom half to 3/4 of the probe. Mine came completely out of the water, but if yours is in at least half way, it should be good. Sorry that I caused some confusion with 'submersed' haha.
 
They seem to last about 1-2 years for alot of people. Is this a new or old APEX set up? Also, I know this sounds dumb, but is it actually submersed? My ATO failed to refill once, leaving my probe out of water, and I started troubleshooting the probe before even looking to see if it was in water lol.

Edit- I think you might need try recalibrating. I see your salinity hit almost 44 when it should be around 35. That steady rise makes me think something else is happening.
Here is a better pic

508EF770-F0EB-4024-9F84-B775B200CA18.jpeg
 
They seem to last about 1-2 years for alot of people. Is this a new or old APEX set up? Also, I know this sounds dumb, but is it actually submersed? My ATO failed to refill once, leaving my probe out of water, and I started troubleshooting the probe before even looking to see if it was in water lol.

Edit- I think you might need try recalibrating. I see your salinity hit almost 44 when it should be around 35. That steady rise makes me think something else is happening.
I’ll have to go get some more of the calibration solutions tomorrow
 
Hmmm, that changes things if it is brand new. I would open a ticket with Neptune. I have had nothing but wonderful experiences with their tech support. They are pretty fast at responding (especially with how many people they troubleshoot with) and are very patient on the phone with you.

The only other thing I can think of would be issues if it is in a turbulent place in the sump. But nothing about that would cause it to just read a flat zero.
 
Hmmm, that changes things if it is brand new. I would open a ticket with Neptune. I have had nothing but wonderful experiences with their tech support. They are pretty fast at responding (especially with how many people they troubleshoot with) and are very patient on the phone with you.

The only other thing I can think of would be issues if it is in a turbulent place in the sump. But nothing about that would cause it to just read a flat zero.
Are the probes supposed to be totally submersed? ....the water may be a little rough were I have them. The are just past where the socks drain. Could put them in the section where the return pump is.
 

TOP 10 Trending Threads

HOW WOULD YOU FEEL ABOUT RECEIVING A FISH OR CORAL AS A HOLIDAY GIFT?

  • I’d love one, as long as it’s a species I chose

    Votes: 20 25.3%
  • I’d trust someone who knows my tank to choose

    Votes: 7 8.9%
  • I’d rather get a gift card and pick it myself

    Votes: 30 38.0%
  • I’d prefer gear or supplies instead

    Votes: 2 2.5%
  • Please don’t surprise me with livestock

    Votes: 20 25.3%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new