Sam's Oceanic 120 - DIY solutions

Darn it read the whole thread first......some kind of foldable filter gizmo
 
replaced my kalk yesterday. I was getting nervous about my Kalk dosing so I decided to look into it... Turns out the Pickling Lime condensed around the stirrer blade like a puck; so the whole thing would spin but not really mix. Guess I need to increase the stirring to keep it suspended in the water. lowered dosing back to ~100ml/hr; 110ml/hr 6-11am.

Thanks to Steve at PrecisionConverting I can run my tank for another year!
IMG_3760.JPEG

Carving out a sign/light shade for a Canary Blenny...
IMG_3761.JPEG

found a spot to store my sign
IMG_3762.JPEG
 
replaced my kalk yesterday. I was getting nervous about my Kalk dosing so I decided to look into it... Turns out the Pickling Lime condensed around the stirrer blade like a puck; so the whole thing would spin but not really mix. Guess I need to increase the stirring to keep it suspended in the water. lowered dosing back to ~100ml/hr; 110ml/hr 6-11am.

Thanks to Steve at PrecisionConverting I can run my tank for another year!
IMG_3760.JPEG

Carving out a sign/light shade for a Canary Blenny...
IMG_3761.JPEG

found a spot to store my sign
IMG_3762.JPEG
Happy you discovered the puck problem early!

Which Precision Converting? WI or FL?
 
https://preconfilter.com/
Puck problem a known thing? Guess I should search for kalk-stirrer gripe pages to save myself some learnin'.
Actually, it very much is. I never had to deal with one. I know lack of experience has no right to talk. I've seen reports of it. Not hard to find if you look for a problem. Hard to find a problem until you run into it.
 
Ok; stirrer will go for 2 seconds every 3 minutes. hope it doesn't annoy me. I need to add the LEDs like I have for Adam's - Disco stirrer. I hope I don't oversaturate and precipitate out the Calcium? (Something bad happens if you over stir your calc in atmosphere.)
 
Ok; stirrer will go for 2 seconds every 3 minutes. hope it doesn't annoy me. I need to add the LEDs like I have for Adam's - Disco stirrer. I hope I don't oversaturate and precipitate out the Calcium? (Something bad happens if you over stir your calc in atmosphere.)
Have your mix at 2 tablespoons per gallon. That provides a fully saturated mix. Check the ph weekly for drop to clue you in on when to add more kalk. Exposure to air won't precipitate the calcium out of solution, but will degrade the potency, so make sure your stirrer is sealed. I'm not sure that two seconds every few minutes will do the trick. I set mine to stir (via magnetic stir plate) for 2 minutes every hour. That keeps the solution saturated and it from caking up.
 
Have your mix at 2 tablespoons per gallon. That provides a fully saturated mix. Check the ph weekly for drop to clue you in on when to add more kalk. Exposure to air won't precipitate the calcium out of solution, but will degrade the potency, so make sure your stirrer is sealed. I'm not sure that two seconds every few minutes will do the trick. I set mine to stir (via magnetic stir plate) for 2 minutes every hour. That keeps the solution saturated and it from caking up.
I'm going to put in the LEDs before I put out any more videos on it. Its a DIY high-capacity version I made myself. ;)
 
https://preconfilter.com/
Puck problem a known thing? Guess I should search for kalk-stirrer gripe pages to save myself some learnin'.
Precision Converting is obviously a pretty well-used name!

Have your mix at 2 tablespoons per gallon. That provides a fully saturated mix. Check the ph weekly for drop to clue you in on when to add more kalk. Exposure to air won't precipitate the calcium out of solution, but will degrade the potency, so make sure your stirrer is sealed. I'm not sure that two seconds every few minutes will do the trick. I set mine to stir (via magnetic stir plate) for 2 minutes every hour. That keeps the solution saturated and it from caking up.
B-I-N-G-O!
 
Before I left on Saturday:

A friend gave me an awesome rainbow bubble tip anemone which went into the 15gallon.
5F404951-2194-4DF9-9013-FB900612861B.jpeg FC47F244-98E3-4AB5-96D9-8987598BEE98.jpeg
And I traded some light shades to Jim@ ReefWISE for a canary blenny, a green mandarin a flame scallop and a ton of cleanup crew! He hooked me up.

6A740AB5-1688-49AB-917B-B8135346286A.jpeg 5A18CC84-C16A-4672-906A-4ECF151B7857.jpeg

Timmy is getting to be chunky! He’s definitely transitioning
290E8383-4094-4699-80B7-4CF64AA2308F.jpeg
D407D08E-456B-47E3-823F-0665873E29B3.jpeg 7ABD1F39-C3AD-43E7-9713-645E4E42977C.jpeg
 

TOP 10 Trending Threads

WHEN PLANNING CORAL PLACEMENT, WHAT USUALLY WINS? THE FUTURE COLONY, OR THE NEXT FRAG?

  • I leave plenty of open space for large future colonies

    Votes: 3 21.4%
  • I plan for growth...but occasionally squeeze coral into tight spaces

    Votes: 5 35.7%
  • I try to balance future growth with variety now

    Votes: 4 28.6%
  • I fit in as many frags as I reasonably can

    Votes: 3 21.4%
  • One more frag always wins! Future me can solve the problem...

    Votes: 0 0.0%
  • It depends on the coral and how quickly it grows

    Votes: 1 7.1%
  • I squeeze 'em in! Survival of the fittest, baby!!

    Votes: 0 0.0%
  • I’m already out of room, so apparently we know my answer...

    Votes: 1 7.1%
Back
Top
Home
Post thread…
Market
What's new