Sicce Return Pump Selection

[Caleb123]

I am in the process of putting together an Innovative Marine 170 EXT with a Trigger Systems CR44 Sump. I plan to buy a Sicce SDC return pump for Black Friday but I’m not sure of which one to buy. Does anyone have experience with the 7.0 SDC or the 9.0 SDC?

 

[KStatefan]

I am in the process of putting together an Innovative Marine 170 EXT with a Trigger Systems CR44 Sump. I plan to buy a Sicce SDC return pump for Black Friday but I’m not sure of which one to buy. Does anyone have experience with the 7.0 SDC or the 9.0 SDC?

I have a 7.0 on my 100ext suppling one return thru an UV.

 

[Dburr1014]

I am in the process of putting together an Innovative Marine 170 EXT with a Trigger Systems CR44 Sump. I plan to buy a Sicce SDC return pump for Black Friday but I’m not sure of which one to buy. Does anyone have experience with the 7.0 SDC or the 9.0 SDC?

I have a syncra sdc 9 pumping up from my basement @ 66%. 14' head 350ish gph. 4 years, cleaned it 2x. 42 dB

 

[Caleb123]

Do you like it?

I have a syncra sdc 9 pumping up from my basement @ 66%. 14' head 350ish gph.

do you like the pump? How long have you been running it and have you had any issues?

 

[Caleb123]

I have a 7.0 on my 100ext suppling one return thru an UV.

Do you like the pump? Do you believe that it is powerful enough for a 170?

 

[KStatefan]

Do you like the pump? Do you believe that it is powerful enough for a 170?

Mine is pumping 220 gph at 29%

 

[MichaelReefer]

I am in the process of putting together an Innovative Marine 170 EXT with a Trigger Systems CR44 Sump. I plan to buy a Sicce SDC return pump for Black Friday but I’m not sure of which one to buy. Does anyone have experience with the 7.0 SDC or the 9.0 SDC?

I am a firm believer in ALWAYS going slightly bigger.

Less wear and tear on a pump running at 50% rather than 100%, at least in my opinion.

 

[EeyoreIsMySpiritAnimal]

Mine is pumping 220 gph at 29%

I thought the 7.0 was 800 gph minimum

 

[Dburr1014]

Do you like it?

do you like the pump? How long have you been running it and have you had any issues?

4 years, yes, powerful. My next build will be in a basement. IM 170 ext. This will be used as the sump pump. Way powerful enough for that.

 

[EeyoreIsMySpiritAnimal]

I'm looking at these pumps as well and trying to figure out if the 9.0 is overkill for a 140g plus sump

 

[Dburr1014]

I thought the 7.0 was 800 gph minimum

That depends on the head.
Manufacturers always state @ 0 head.

 

[EeyoreIsMySpiritAnimal]

That depends on the head.
Manufacturers always state @ 0 head.

Very good point!

 

[KStatefan]

I thought the 7.0 was 800 gph minimum

at zero head

 

[EeyoreIsMySpiritAnimal]

at zero head

Yeah, I forgot about that, lol.
How high is your pump pushing water? Mine will only be about 4.5 feet

 

[KStatefan]

That depends on the head.
Manufacturers always state @ 0 head.

I wish they would publish pump curves and different power setting. The only one I have seen do that is Royal Dragon.

 

[KStatefan]

Yeah, I forgot about that, lol.
How high is your pump pushing water? Mine will only be about 4.5 feet

Sump is under the tank so 36 - 42 inches not sure exact number.

 

[Dburr1014]

I wish they would publish pump curves and different power setting. The only one I have seen do that is Royal Dragon.

They can be found.

 

[EeyoreIsMySpiritAnimal]

They can be found.

Those are all at 100%

 

[Dburr1014]

Those are all at 100%

Well yes, but then you know you can turn them down.
For instance, I picked the 9 because I knew I need 14' head. It does 23. I could do 1500 gph @ 14' head.

 

[EeyoreIsMySpiritAnimal]

Well yes, but then you know you can turn them down.
For instance, I picked the 9 because I knew I need 14' head. It does 23. I could do 1500 gph @ 14' head.

But @KStatefan was asking about charts that showed pump curves at different power settings. My comment was that the chart posted does not show this.