Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Thank you regular meant not GE I or GE IIDefine "regular silicone." A lot of the product at HD/Lowes have mold inhibitors that you definitely don't want in an aquarium...
My preference is to buy an aquarium specific brand like aqueon, even if it costs a few extra dollars. Just be aware of what you are purchasing.
Lots of posts on silicones, with a ton of myths. I too use mostly aquarium silicone, even if it is repacked for a hobby premium; though I have also used both GE1 and GE2. I've never seen any reliable data that shows there is actually any mold inhibitors in either. GE1 is an acetoxy cure (vinegar smell) silicone and formulated for glass. GE2 is a neutral cure silicone and formulated to work better on plastics (neutral cure silicones are more naturally mold resistant, though also worse if used without a proper cure time). Since all of my silicone jobs are on glass, I prefer GE1. The problem IME, is not whether one is more or less safe than the other, rather that you provide adequate curing times. The package says 24 hours, but for a 1/8" bead; for the type of beads most would need on a sump or tank a week is more likely. Some folks do a test bead on a piece of cardboard and cut into it after a few days to gauge the curing process.
I'm not certain how these products actually relate, but...
If you go to home Depot for GE Silicone II, at this link:
https://www.homedepot.com/p/GE-Silicone-II-10-1-oz-Clear-Kitchen-and-Bath-Caulk-GE5040-12C/100663319
It says it is GE#5040
Then there are two different SDS sheets listed on that page. One lists no unusual chemicals, and the second one lists
dibutyltindiacetate 0.1 to 1%
https://www.homedepot.com/catalog/pdfImages/97/97ded25b-296e-414f-be6c-bbd321d771da.pdf
This product SDS lists the exact product number for GE Silicone 2 at Home Depot (5040 12C) and it also shows the tin compound:
https://cwip.com/Customer/cewhin/customerpages/specpages/38751.pdf
Dibutyltindiacetate is a polymerization catalyst, but tin is also well known to prevent biofouling of surfaces.