- Joined
- Jul 14, 2013
- Messages
- 1
- Reaction score
- 0
- Location
- Houston
- What state or country do you live in
- Texas
Long time lurker, first time caller....or something like that.
I'd like to tap into the wisdom of this group on an "issue" I'm observing on my tank: what to do when your pH is good but alkalinity always comes in low on test day?
Not trying to chase numbers, but I've seen this trend consistently and for long enough that I'm wondering what levers I should pull on, gently.
Some background on my tank.
UNS R75, up and running for about 7 months. About 50 gallons of total tank volume between the display and the sump.
Today's water parameters (pretty representative of what I see)
salinity: 1.025 SG
pH: 8.3-8.4
alkalinity: 6.3 dKH
nitrates: 0.1 ppm
phosphates: 0.04 ppm
calcium: 392 ppm
magnesium: 1335 ppm
Stocked with:
Royal Gramma
Clownfish
Chalk basslet
Tailspot Blenny
Diamond Watchman Goby
Citron Clown Goby
Tomini Tang (world's smallest)
Assorted inverts and CUC
Tropic Marin salt. I do a 4 gallon water change about every other week. I run the refugium light at night on a complementary light schedule.
Dosing about 400 ml/day of kalkwasser, broken up into 40 ml shots every hour starting at midnight. I could dose kalkwasser a little bit heavier if I needed to because the ATO still runs every day.
Tank is still pretty young, so coral load is light. Bioload is light(ish?) and I run a big skimmer for the tank (Reef Octo 110). I should mention that the pH is only in the 8.1-8.3 range when I run a CO2 scrubber on the skimmer. If I let the media get exhausted, pH can drop to 7.7-7.8 range. I've got a little bit of green hair algae cropping up, but not to the point I'd call it an issue (and the tang is a recent addition).
For the most part, I am seeing happy corals. Observing growth from all of them, good polyp extension, etc. Seeing lots of coraline algae encrusting the rock.
What would you suggest I do, if anything, to get the alkalinity into that 8-10 dKH range?
I'd like to tap into the wisdom of this group on an "issue" I'm observing on my tank: what to do when your pH is good but alkalinity always comes in low on test day?
Not trying to chase numbers, but I've seen this trend consistently and for long enough that I'm wondering what levers I should pull on, gently.
Some background on my tank.
UNS R75, up and running for about 7 months. About 50 gallons of total tank volume between the display and the sump.
Today's water parameters (pretty representative of what I see)
salinity: 1.025 SG
pH: 8.3-8.4
alkalinity: 6.3 dKH
nitrates: 0.1 ppm
phosphates: 0.04 ppm
calcium: 392 ppm
magnesium: 1335 ppm
Stocked with:
Royal Gramma
Clownfish
Chalk basslet
Tailspot Blenny
Diamond Watchman Goby
Citron Clown Goby
Tomini Tang (world's smallest)
Assorted inverts and CUC
Tropic Marin salt. I do a 4 gallon water change about every other week. I run the refugium light at night on a complementary light schedule.
Dosing about 400 ml/day of kalkwasser, broken up into 40 ml shots every hour starting at midnight. I could dose kalkwasser a little bit heavier if I needed to because the ATO still runs every day.
Tank is still pretty young, so coral load is light. Bioload is light(ish?) and I run a big skimmer for the tank (Reef Octo 110). I should mention that the pH is only in the 8.1-8.3 range when I run a CO2 scrubber on the skimmer. If I let the media get exhausted, pH can drop to 7.7-7.8 range. I've got a little bit of green hair algae cropping up, but not to the point I'd call it an issue (and the tang is a recent addition).
For the most part, I am seeing happy corals. Observing growth from all of them, good polyp extension, etc. Seeing lots of coraline algae encrusting the rock.
What would you suggest I do, if anything, to get the alkalinity into that 8-10 dKH range?
