SR60 , return upgrade

[RSREEFING]

I need some help here. So i bought an ecotech s2 return to upgrade my stock innovative marine return pumps. It came with an 3/4 output fitting. Innovative marine fitting size is 1/2.
What would be the best way to set this up and possibly continue having all the 4 stock return return nozzles still usable.

 

[Eddielg]

Not familiar with innovative plumbing, however if it uses standard 1/2 pvc lines, you can just a common pvc 3/4”x1/2” reducer bushing available at big box stores. If your plumbing is vinyl or silicone you will have to get the ecotech barb kit and get a 3/4”x1/2” barbed reducer to run existing plumbing. I have an ecotech 3/4” barbed fitting if that is what you need. Good luck

 

[Eddielg]

Not familiar with innovative plumbing, however if it uses standard 1/2 pvc lines, you can just a common pvc 3/4”x1/2” reducer bushing available at big box stores. If your plumbing is vinyl or silicone you will have to get the ecotech barb kit and get a 3/4”x1/2” barbed reducer to run existing plumbing. I have an ecotech 3/4” barbed fitting if that is what you need. Good luck

Also, the reducing bushings from big box stores come in threaded versions.