Starting an algae reactor?

  • Thread starter Thread starter jcates
  • Start date Start date
  • Tagged users Tagged users None

jcates

Active Member
View Badges
Joined
Jul 1, 2020
Messages
237
Reaction score
151
Location
Finger Lakes, NY
Rating - 0%
0   0   0
Ok so I have installed an algae reactor, Saturday, and put in two tennis ball sized portions of chaeto. I quit dosing nopox as it doesn't play well with chaeto as I understand. Running it opposite my light schedule with some overlap for a total of 15 hours. PO4 is rising as I wait for the chaeto. (.05) with puts in .17 range now.

Now the question is can/should I run a little gfo while this is getting established or dose Phosphat-E? Or neither and just be a little more patient? Just trying to make sure I don't have any crazy spikes that will bother sps while switching over
 
I would manage nutrients to keep from any negative impact to corals and gradually reduce that control as the reactor comes up to full capacity. If you can manage GFO so it doesn't pull too much out, that's fine. I had better luck hitting targets using lanthanum chloride though.
 
I would manage nutrients to keep from any negative impact to corals and gradually reduce that control as the reactor comes up to full capacity. If you can manage GFO so it doesn't pull too much out, that's fine. I had better luck hitting targets using lanthanum chloride though.
That was my thoughts as well. At least with lanthanum it's a more measured approach.

Thanks
 
GFO may have an affect on the chaeto. Allow the unit to seed itself which will reduce the phos and nitrate - which GFO is often used for
 
Ok so I have installed an algae reactor, Saturday, and put in two tennis ball sized portions of chaeto. I quit dosing nopox as it doesn't play well with chaeto as I understand. Running it opposite my light schedule with some overlap for a total of 15 hours. PO4 is rising as I wait for the chaeto. (.05) with puts in .17 range now.

Now the question is can/should I run a little gfo while this is getting established or dose Phosphat-E? Or neither and just be a little more patient? Just trying to make sure I don't have any crazy spikes that will bother sps while switching over
What ya mean as you wait for the chaeto?
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 17.7%
  • Fish or coral food

    Votes: 5 5.2%
  • Test kits or reagents

    Votes: 10 10.4%
  • Filter media or replacement fleece

    Votes: 5 5.2%
  • RO/DI filters or supplies

    Votes: 15 15.6%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 12 12.5%
  • I keep a backup of everything

    Votes: 25 26.0%
  • Other (Post in the comments)

    Votes: 7 7.3%
Back
Top
Home
Post thread…
Market
What's new