Starting an algae reactor?

jcates

Active Member
View Badges
Joined
Jul 1, 2020
Messages
237
Reaction score
161
Location
Finger Lakes, NY
Rating - 0%
0   0   0
Ok so I have installed an algae reactor, Saturday, and put in two tennis ball sized portions of chaeto. I quit dosing nopox as it doesn't play well with chaeto as I understand. Running it opposite my light schedule with some overlap for a total of 15 hours. PO4 is rising as I wait for the chaeto. (.05) with puts in .17 range now.

Now the question is can/should I run a little gfo while this is getting established or dose Phosphat-E? Or neither and just be a little more patient? Just trying to make sure I don't have any crazy spikes that will bother sps while switching over
 

Quietman

2500 Club Member
View Badges
Joined
May 14, 2017
Messages
3,273
Reaction score
10,881
Location
Indiana - born and bred
Rating - 0%
0   0   0
I would manage nutrients to keep from any negative impact to corals and gradually reduce that control as the reactor comes up to full capacity. If you can manage GFO so it doesn't pull too much out, that's fine. I had better luck hitting targets using lanthanum chloride though.
 
OP
OP
jcates

jcates

Active Member
View Badges
Joined
Jul 1, 2020
Messages
237
Reaction score
161
Location
Finger Lakes, NY
Rating - 0%
0   0   0
I would manage nutrients to keep from any negative impact to corals and gradually reduce that control as the reactor comes up to full capacity. If you can manage GFO so it doesn't pull too much out, that's fine. I had better luck hitting targets using lanthanum chloride though.
That was my thoughts as well. At least with lanthanum it's a more measured approach.

Thanks
 

vetteguy53081

Well known Member and monster tank lover
View Badges
Joined
Aug 11, 2013
Messages
92,243
Reaction score
203,950
Location
Wisconsin -
Rating - 100%
14   0   0
GFO may have an affect on the chaeto. Allow the unit to seed itself which will reduce the phos and nitrate - which GFO is often used for
 

roggy23

Well-Known Member
View Badges
Joined
Apr 20, 2018
Messages
506
Reaction score
111
Rating - 100%
1   0   0
Ok so I have installed an algae reactor, Saturday, and put in two tennis ball sized portions of chaeto. I quit dosing nopox as it doesn't play well with chaeto as I understand. Running it opposite my light schedule with some overlap for a total of 15 hours. PO4 is rising as I wait for the chaeto. (.05) with puts in .17 range now.

Now the question is can/should I run a little gfo while this is getting established or dose Phosphat-E? Or neither and just be a little more patient? Just trying to make sure I don't have any crazy spikes that will bother sps while switching over
What ya mean as you wait for the chaeto?
 

Going off the ledge: Would you be interested in a drop off aquarium?

  • I currently have a drop off style aquarium

    Votes: 2 1.4%
  • I don’t currently have a drop off style aquarium, but I have in the past.

    Votes: 2 1.4%
  • I haven’t had a drop off style aquarium, but I plan to in the future.

    Votes: 22 15.2%
  • I am interested in a drop off style aquarium, but have no plans to add one in the future.

    Votes: 68 46.9%
  • I am not interested in a drop off style aquarium.

    Votes: 48 33.1%
  • Other.

    Votes: 3 2.1%
Back
Top