Steve's Led settings for a 32 nano

[lkriley]

Hi Jason, these are the settings you have on the 32 bio cube upgrade by Steve Sled right? I went with the original settings suggested in their PDF. I have increased a little at a time, and since found out if you increase blue you need to decrease white. My settings right now are 1&3 at 1690, 2&4 at 845. I have slowly adjusted to get the whites down since they were way too high which explains why I have lost or bleached out corals. After seeing your post I see I still need to keep lowering my whites and increasing the blues. I am so glad I found your post. Thank you.

Thanks for your input Jason, it helps tremendously.

 

[jasonrusso]

Thanks for your input Jason, it helps tremendously.

Another reason I use these settings is because it makes the fluorescence pop. Too much white light washes out the glow.

 

[jasonrusso]

Thanks for your input Jason, it helps tremendously.

FWIW, I have a Red Sea C-130 34 gallon. I'm pretty sure it is the same light with a different mount.

 

[biofish]

Mine are at 2300 on the blues (56%) and the whites are around 400 (10%). My lights are fairly new so only time will tell.

Still the same settings? This is what i was aiming for, just wanted to see how yours were doing.