Sump fan melted

  • Thread starter Thread starter Chipp
  • Start date Start date
  • Tagged users Tagged users None

Chipp

Community Member
View Badges
Joined
Sep 23, 2018
Messages
77
Reaction score
97
What state or country do you live in
Pennsylvania
Rating - 0%
0   0   0
woke up to this this morning smell of burning plastic. It was a 24vdc fan connected to the apex accessory port.

IMG_0239.jpg IMG_0240.jpg IMG_0244.jpg
 
I'd make installing a gfci on that outlet a high priority.

Curious - Probably around a tank - most outlets should have a GFCI - I get the impression that the fan was connected to the apex accessory port? (or did you mean the port into which the Apex is plugged? Thanks. I cant see how this could happen - water splashing onto the motor?
 
It looks like some of the fans we have had to replace over the years in oil rig IDF cabinets for the controls. Melted, burned up and rust everywhere. If the fan was exposed to "salt air" or any moisture and was not rated for it, this is what happens. We are now replacing the fans with all plastic and ceramic units that are rated for salt exposure before they fail, as the equipment in those cabinets gets pretty toasty without a fan. Even the ones listed as "stainless screws" will rust at some point and should be avoided.

As for cooling fans, there are some companies that make them specifically for cooling off our reef tanks, as the ones we use for these cabinets are over 500 a piece and way over kill for a reef tank.
 
@Chipp See, i told told you it was a dumb question ;Woot

wonder if the salt spray just got to it after a while.
how old was it? was it exhausting from the cabinet or blowing into the cabinet?
 
@Chipp See, i told told you it was a dumb question ;Woot

wonder if the salt spray just got to it after a while.
how old was it? was it exhausting from the cabinet or blowing into the cabinet?

No such thing as a dumb question. It's about 3 months, and it was blowing straight down into the sump for evaporative cooling. I bought that one only because it allowed me to take advantage of the apex accessory port, but i can just replace it with and icecap or reef octopus fan plugged into my second eb. It also left little flecks on top of my sump.

IMG_0241.jpg IMG_0242.jpg
 
I installed a 4" fan above my 20 gal sump last summer facing down toward the sump. It was rusting up by the end of the year. I had another fan that was above that in the same area(never run or wired up), after 8 years I pulled it last year, totally seized up.
 
Buy an IP65 or better still an IP67 rated fan. Noctua makes good ones that you can pick up on Amazon
 
I installed a 4" fan above my 20 gal sump last summer facing down toward the sump. It was rusting up by the end of the year. I had another fan that was above that in the same area(never run or wired up), after 8 years I pulled it last year, totally seized up.

I have gotten away completely from putting anything 'electronic' in the same compartment as my sump. (all of the controls are in a separate cabinet). It was just too often that something would happen.
 

TOP 10 Trending Threads

WHAT KIND OF REEFING DEAL ARE YOU HOPING TO PICK UP THIS BLACK FRIDAY?

  • A whole new aquarium or complete system

    Votes: 2 11.8%
  • Lighting, pumps, or other major equipment

    Votes: 2 11.8%
  • Controllers, testing, dosing, or automation gear

    Votes: 2 11.8%
  • Dry goods and restocks, like salt, media, or food

    Votes: 2 11.8%
  • Corals! Must...Have...CORALS!!!

    Votes: 4 23.5%
  • Fish or other livestock

    Votes: 0 0.0%
  • Rock, sand, or other aquascaping supplies

    Votes: 1 5.9%
  • I’m browsing, but don’t have a specific target

    Votes: 2 11.8%
  • I’m not shopping for reef deals this year

    Votes: 1 5.9%
  • Other (Post in the comments)

    Votes: 1 5.9%
Back
Top
Home
Post thread…
Market
What's new