T5 mounting advice

twhit030

Active Member
View Badges
Joined
Mar 16, 2021
Messages
150
Reaction score
44
Location
Saint simons island Georgia
Rating - 100%
1   0   0
okay r2r I need some help from the people lol.
I have a 75 gallon all sps system going up. I just got my new 48 inch t5 giesmann 8 bulb fixture in and considering I’ve used the el cheapo Amazon version in the past… this things way heavier. I NEED MOUNTING OPTIONS!!

I’ve considered rim mount on the tank but I want the lights up about 10 inches off the water snd don’t know where or how I’d make a 10 inch leg mount.

I’ve considered hanging from the ceiling but of course our Florida home is one of the few with like 13ft ceilings.

I’d also thought about doing mount off the wall from behind but of course as you can see in the picture above there’s a window (will always be converted to control algae growth) and nothing to drill into. (I guess I could go out from the sides of the window and just have the cords pulling outwards a little.

please help with ideas I want to use these lights but if I can’t find a realistic mounting option I’ll have no choice but to get rid of them.

0FEE143F-EF84-4F2D-9C4A-6E91C1E3E556.jpeg
 

LeftyReefer

2500 Club Member
View Badges
Joined
Jun 17, 2020
Messages
2,535
Reaction score
2,821
Location
Saginaw
Rating - 0%
0   0   0
If a wall mount or ceiling mount isn't possible, it looks like you will need to mount something off the back of the tank stand.
or perhaps a couple hanger brackets screwed to the inside/top of your window frame?
 

fishface NJ

5000 Club Member
View Badges
Joined
Aug 27, 2019
Messages
6,541
Reaction score
30,711
Location
NJ and Cape Coral, FL
Rating - 0%
0   0   0
Conduit pipe and bend it with the conduit bender. Painted it black. Rests on the floor with a bracket holding it to the stand

ACC2056F-968E-431C-9AE5-C5BB4B6EFC5E.jpeg
 

reefingaz

Active Member
View Badges
Joined
May 22, 2021
Messages
139
Reaction score
232
Location
Scottsdale
Rating - 0%
0   0   0
How about you use some cool black 3/4” gas pipe with 90’s. Mount it above the window then bring down with one 90’ to the 12-14” above tank then another 90 to be horizontal to tank. Wish I could show a pic
 
OP
OP
twhit030

twhit030

Active Member
View Badges
Joined
Mar 16, 2021
Messages
150
Reaction score
44
Location
Saint simons island Georgia
Rating - 100%
1   0   0
So I did that with a previous build on some ai primes (individually) and it worked very very well. But idk how to begin haha I was thinking some steel square pipe from homedepot then figure out how to bend it
Conduit pipe and bend it with the conduit bender. Painted it black. Rests on the floor with a bracket holding it to the stand

ACC2056F-968E-431C-9AE5-C5BB4B6EFC5E.jpeg
ohhh I like that that’s a good idea. My father in law sells conduit as well haha.
 
OP
OP
twhit030

twhit030

Active Member
View Badges
Joined
Mar 16, 2021
Messages
150
Reaction score
44
Location
Saint simons island Georgia
Rating - 100%
1   0   0
How about you use some cool black 3/4” gas pipe with 90’s. Mount it above the window then bring down with one 90’ to the 12-14” above tank then another 90 to be horizontal to tank. Wish I could show a pic
If you could find a picture or drawing of that that would be awesome.
 
OP
OP
twhit030

twhit030

Active Member
View Badges
Joined
Mar 16, 2021
Messages
150
Reaction score
44
Location
Saint simons island Georgia
Rating - 100%
1   0   0
If a wall mount or ceiling mount isn't possible, it looks like you will need to mount something off the back of the tank stand.
or perhaps a couple hanger brackets screwed to the inside/top of your window frame?
I never thought of doing the inside of the window Frame im sure that would work really well actually. Might even hide where it attaches to the wall itself with it being recessed into the window frame like that
 
OP
OP
twhit030

twhit030

Active Member
View Badges
Joined
Mar 16, 2021
Messages
150
Reaction score
44
Location
Saint simons island Georgia
Rating - 100%
1   0   0
Okay here’s a slightly off topic question it’s a 3 channel 8 bulb fixture from left to right numbered 1 2 3 4 5 6 7 8

channel 1 = 1,8
Channel 2 = 2,3,6,7
Channel 3 = 4,5

ive been seeing par numbers people put up in an identical tank and I’m seeing a lot of people hitting 500 part 4 inches below water with all 8 bulbs.

I was considering doing channel 1 and 2 then just leaving channel 3 empty. Is there anything wrong with that? Any problems that may occurs? There’s 3 plugs for the 3 channels.

should I plug all 3 plugs in and just not put in bulbs in channel 3 or should I just not even plug it in at all? The fixture does have a plastic clear screen that keeps salt splash out of the inside so I don’t see why it would be bad to leave them empty
 

A worm with high fashion and practical utility: Have you ever kept feather dusters in your reef aquarium?

  • I currently have feather dusters in my tank.

    Votes: 73 37.6%
  • Not currently, but I have had feather dusters in my tank in the past.

    Votes: 66 34.0%
  • I have not had feather dusters, but I hope to in the future.

    Votes: 25 12.9%
  • I have no plans to have feather dusters in my tank.

    Votes: 28 14.4%
  • Other.

    Votes: 2 1.0%
Back
Top