TDS of rodi

  • Thread starter Thread starter JKDMan
  • Start date Start date
  • Tagged users Tagged users None

JKDMan

Active Member
View Badges
Joined
Jan 25, 2020
Messages
154
Reaction score
49
What state or country do you live in
Ohio
Rating - 0%
0   0   0
I just replaced the filter cartridges in my rodi and maybe 100 gal have passes thru them, I'm getting a tds reading of 55. Could it be the container I hold it in has something contributing or is something wrong with the rodi filter.. i collect the water in a lexan container for restaurants, which is open to the air.
 
Did you really pack down the resin? You want to make sure the water can't find a channel to pass through and essentially miss filtering through the resin.

You could also collect a small sample in another container and measure TDS there to rule the container out as a cause.
 
I just replaced the filter cartridges in my rodi and maybe 100 gal have passes thru them, I'm getting a tds reading of 55. Could it be the container I hold it in has something contributing or is something wrong with the rodi filter.. i collect the water in a lexan container for restaurants, which is open to the air.
Have you flushed your membrane? Could be TDS creep.
 
Its a new cartridge I bought pre filled.. it came vacuum sealed
 
So you replaced the RO membrane as well?
I replaced everything, poly block, carbon block, ro membrane and di resin cartridge
 
What is your TDS after the Ro membrane?
Also how old is the Di resin cartridge that you are using and was it stored in an air tight bag?
 
I replaced everything, poly block, carbon block, ro membrane and di resin cartridge
And your TDS in the past has been 0?
 
What is your TDS after the Ro membrane?
Also how old is the Di resin cartridge that you are using and was it stored in an air tight bag?
It's all brand new, only passed about 100 gal thru it haven't checked it before di resin, it came from vendor vacuum sealed
 
Depending on the quality of the membrane. My tap water tds is about 200ppm and after RO its <10. The manufacture claimed >90% reduction in tds, which is the case for me. I don't have DI. I assume DI can further reduce the TDS, but i assume there must be a limitation due to flow rate versus absorption rate of the DI.

What is your tap water tds?
 
Depending on the quality of the membrane. My tap water tds is about 200ppm and after RO its <10. The manufacture claimed >90% reduction in tds, which is the case for me. I don't have DI. I assume DI can further reduce the TDS, but i assume there must be a limitation due to flow rate versus absorption rate of the DI.

What is your tap water tds?
I'll have to check
 
Idk, just got a meter
Ah, then the obvious answer could be you have really crappy water.
You may need to add additional DI canister to get down to 0.
 
Ah, then the obvious answer could be you have really crappy water.
You may need to add additional DI canister to get down to 0.
I'll have to check
 
Ah, then the obvious answer could be you have really crappy water.
You may need to add additional DI canister to get down to 0.

If post RO is so high, adding a second RO membrane may be another solution. Using DI to reduce 50+tds is going to exhaust the DI resin quickly.
 
You’re gonna need a TDS meter actually in situ on your RODI unit. I assume you’ve just got a TDS pen or something.
Yes a pen
 

TOP 10 Trending Threads

HOW DO YOU HANDLE HOLIDAY DECORATING AROUND YOUR REEF?

  • I decorate the tank or stand

    Votes: 1 4.5%
  • I decorate AROUND the tank or stand

    Votes: 4 18.2%
  • I add one small seasonal touch but keep it very basic

    Votes: 0 0.0%
  • I take a holiday photo, but don’t decorate the space

    Votes: 0 0.0%
  • I leave the reef area as it is

    Votes: 13 59.1%
  • We don’t decorate for the holidays

    Votes: 4 18.2%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new