The new SLIP.7 for nano back compartments

[SantaMonica Verified Sponsor]

The new SLIP.7 for nano back compartments. It can be operated in these combinations:


Waterfall algae scrubber for up to 0.7 frozen cubes of food a day.
- Fed from top water tubing
- Fed from bottom water tubing
- Fed from display overflow into back compartment

Chaeto reactor for up to 0.3 frozen cubes of food a day.
- Fed from top water tubing
- Fed from bottom water tubing
- Fed from display overflow into back compartment

Upflow algae scrubber for up to 0.7 frozen cubes of food a day.
- Fed from top air line
- Fed from bottom air line

Combo waterfall and chaeto.
- Fed from top water tubing
- Fed from bottom water tubing
- Fed from display overflow into back compartment

Combo waterfall and upflow (when compartment is halfway full).
- Fed from top water tubing and top air line
- Fed from top water tubing and bottom air line
- Fed from bottom water tubing and top air line
- Fed from bottom water tubing and bottom air line
- Fed from display overflow into back compartment, and top air line
- Fed from display overflow into back compartment, and bottom air line

Combo chaeto and upflow (grow chaeto first, then turn on bubbles to grow algae on chaeto).
- Fed from top water tubing, and top air line on switch
- Fed from top water tubing, and bottom air line on switch
- Fed from bottom water tubing, and top air line on switch
- Fed from bottom water tubing, and bottom air line on switch
- Fed from display overflow into back compartment, and top air line on switch
- Fed from display overflow into back compartment, and bottom air line on switch

Combo waterfall, chaeto and upflow (when compartment is halfway full; grow chaeto first, then turn on bubbles to grow algae on chaeto).
- Fed from top water tubing, and top air line on switch
- Fed from top water tubing, and bottom air line on switch
- Fed from bottom water tubing, and top air line on switch
- Fed from bottom water tubing, and bottom air line on switch
- Fed from display overflow into back compartment, and top air line on switch
- Fed from display overflow into back compartment, and bottom air line on switch

Happy filtering!

 

[SantaMonica Verified Sponsor]

SLIP.7 basic intro video:

 

[SantaMonica Verified Sponsor]

SLIP.7 setup for chaeto only (saltwater), overflow fed.

Using the overflow from a nano display, to feed into the top of the SLIP.7 which slips down into the back of nano AIO back compartment sumps.

Not shown is the GEM5 black shade screen inside.

Dimensions:

9 inches tall (23 cm)
3 1/2 inches wide (9 cm)
1 3/4 inches thick (4.5 cm)

Also, a small block of black filter foam could be added at the botton to catch any chaeto particles, and to block all remaining light out of the bottom.

Version 1.1

SLIP and SLIP.7 are (TM) trademarks of Santa Monica Filtration®

Patents 9115008, 9708207, 9334184, CN203392929U, and other patents pending.

 

[SantaMonica Verified Sponsor]

SLIP.7 setup for waterfall only (freshwater or saltwater), bottom fed.

Use a small water pump to feed into the bottom of the SLIP.7 which then slips down into the back of nano AIO back compartment sumps.

Dimensions:
9 inches tall (23 cm)
3 1/2 inches wide (9 cm)
1 3/4 inches thick (4.5 cm)

Not shown is the GEM5 black shade screen inside.

Also, a small block of black filter foam could be added at the botton to catch any algae particles, and to block all remaining light out of the bottom.

Version 1.1

SLIP and SLIP.7 are (TM) trademarks of Santa Monica Filtration®

Patents 9115008, 9708207, 9334184, CN203392929U, and other patents pending.

 

[SantaMonica Verified Sponsor]

SLIP.7 setup for upflow only (saltwater or freshwater), top fed










Use a small air pump to air into the top of the SLIP.7 which then slips down into the back of nano AIO back compartment sumps.

Dimensions:
9 inches tall (23 cm)
3 1/2 inches wide (9 cm)
1 3/4 inches thick (4.5 cm)

Not shown is the GEM5 black shade screen inside.

Also, a small block of black filter foam could be added at the botton to catch any algae particles, and to block all remaining light out of the bottom.

Version 1.1

SLIP and SLIP.7 are (TM) trademarks of Santa Monica Filtration®

Patents 9115008, 9708207, 9334184, CN203392929U, and other patents pending.

 

[SantaMonica Verified Sponsor]

SLIP.7 setup for chaeto with bubbles, bottom fed





Neat trick for saltwater: Grow chaeto first, then turn on air bubbles to grow slime, GHA, or cyano on the chaeto, then harvest all of it together.

Use a small water pump and air pump for the bottom of the SLIP.7 which then slips down into the back of nano AIO back compartment sumps.

Dimensions:
9 inches tall (23 cm)
3 1/2 inches wide (9 cm)
1 3/4 inches thick (4.5 cm)

Not shown is the GEM5 black shade screen inside.

Also, a small block of black filter foam could be added at the botton to catch any algae particles, and to block all remaining light out of the bottom.

Version 1.1

SLIP and SLIP.7 are (TM) trademarks of Santa Monica Filtration®

Patents 9115008, 9708207, 9334184, CN203392929U, and other patents pending.

 

[SantaMonica Verified Sponsor]

The SLIP.7 is the world's first combo scrubber: It's a chaeto reactor, and a waterfall algae scrubber, and a UAS® upflow algae scrubber® built into one. It slips into the back of almost all nano aquarium back compartments

 

[SantaMonica Verified Sponsor]

Not available yet but it is here for preview...

https://www.santa-monica.cc/product.asp?itemid=101

 

[SantaMonica Verified Sponsor]

Now taking initial orders; will be a week or two to ship
https://www.santa-monica.cc/SLIP7_p_101.html

 

[SantaMonica Verified Sponsor]

Beta test version available...

https://www.santa-monica.cc/SLIP7-nano-chaeto-reactor-waterfall-scrubber-upflow-scrubber_p_101.html

 

[SantaMonica Verified Sponsor]

See updated pics below

 

[SantaMonica Verified Sponsor]

SLIP.7 basic parts, expanded. Beta test model available here:

https://www.santa-monica.cc/SLIP7-nano-chaeto-reactor-waterfall-scrubber-upflow-scrubber_p_101.html

 

[SantaMonica Verified Sponsor]

 

[SantaMonica Verified Sponsor]

SLIP.7 diagrams and photos have been added...

http://algaescrubber.net/SLIP.7-Instructions.pdf

...for the test model SLIP.7 combo scrubber for small sump compartments. In freshwater it can be configured to be an upflow scrubber (preferred), or a waterfall scrubber, or both at the same time, and for saltwater it can be configured to be a chaeto reactor, or upflow scrubber, or waterfall scrubber, or a combination of these. It is available here:

https://www.santa-monica.cc/product.asp?itemid=101

 

[SantaMonica Verified Sponsor]

Here is a SLIP.7 (tm) combo scrubber tucked into a back compartment: