There's something fishy about this build...

Still had water in the ATO so lost less then 5 gallons. Seems like the cold shortened the rubber tubing or something
I have heard cold can shorten alot of things.
 
Are you ok?
Stressed out.


I just don't know what to do with this tank. Do I just leave it be or do work on it. Both have potential to make it better or worse. Right now it just depresses me.
 
If stuff is dying, imo, it time to do something. Did you hang some filter floss yet, does it catch the dinos? And the foam on waters surface seemed to preface this. Start shutting equipment down until it stops. The tank should be fine with no sump, skimmer, nothing. Just a box of rocks with flow- if foam still collects I would think something is in your water
 
If stuff is dying, imo, it time to do something. Did you hang some filter floss yet, does it catch the dinos? And the foam on waters surface seemed to preface this. Start shutting equipment down until it stops. The tank should be fine with no sump, skimmer, nothing. Just a box of rocks with flow- if foam still collects I would think something is in your water
The foam is significantly better now the skimmer is working. Which is why I'm thinking of just leaving it for a while and see if this works gs recover?
 
Get some filter floss hanging. It's pretty gratifying to catch and remove the dino. It immediately starts working and keeps it off your corals
Good place?
IMG_2407.jpeg
 
I was thinking right in the display, directly in the highest flow/ light area. You can use the magnet of a powehead to hold it, and drape it over. But I do this with the blue white filter floss mat, might be easier
 
I was thinking right in the display, directly in the highest flow/ light area. You can use the magnet of a powehead to hold it, and drape it over. But I do this with the blue white filter floss mat, might be easier
Good to know
Is there an optimum time to change it? How often?
 
Good to know
Is there an optimum time to change it? How often?
I rinsed mine right before lights out and again before lights on.
 
Nope


I'll do my parameters soon though.
Cheap microscope isn't bad to have on hand. They usually come with some glass slides. Quick drop of goop, smear around, put into focus and camera pic in the lens and people can help with IDing it. I need to get on that for my dinos--I suspect I've got amphidinium this time.

Are you running UV?
 
Cheap microscope isn't bad to have on hand. They usually come with some glass slides. Quick drop of goop, smear around, put into focus and camera pic in the lens and people can help with IDing it. I need to get on that for my dinos--I suspect I've got amphidinium this time.

Are you running UV?
well we know what santa is getting you next year :)
 
Cheap microscope isn't bad to have on hand. They usually come with some glass slides. Quick drop of goop, smear around, put into focus and camera pic in the lens and people can help with IDing it. I need to get on that for my dinos--I suspect I've got amphidinium this time.
I'll consider it
Are you running UV?
No
Looks like my bulb is broken
 
I booked a manta ray dive!!! They say about an 80% chance to see manta(s)! Dream dive.


Also anyone having issues where R2R suddenly reloads, and time travels back to a later state of the thread you are looking at? Its happening a lot to me.
IMG_2409.png
 

TOP 10 Trending Threads

WHICH KIND OF INVERT HAS CAUSED THE MOST MISCHIEF IN YOUR TANK?

  • Sea urchins

    Votes: 9 19.6%
  • Hermit crabs

    Votes: 7 15.2%
  • Other crabs

    Votes: 4 8.7%
  • Shrimp

    Votes: 4 8.7%
  • Snails or conchs

    Votes: 2 4.3%
  • Sea stars

    Votes: 0 0.0%
  • Anemones

    Votes: 9 19.6%
  • None! My inverts are model citizens. :-)

    Votes: 9 19.6%
  • Something else (tell us in the comments)

    Votes: 2 4.3%
Back
Top
Home
Post thread…
Market
What's new