Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
yes it logs every test. click on the trident icons that look like scientific beakers etc. 1st click will bring up your graph with chartes test results and if you click a 3rd time it will then show you the % of reagents remainingQuestion, I just got mine last night from my LFS...Does the Trident have the ability to automatically log the test results? Where do I go to enable that feature?
Thx for the reply. I saw that option. I was actually referring to the Log used by the Test Kits...There is a log that is generated once you either input it manually or use Alexa to input it for you and it stays there until you remove it.yes it logs every test. click on the trident icons that look like scientific beakers etc. 1st click will bring up your graph with chartes test results and if you click a 3rd time it will then show you the % of reagents remaining
WAIT...I see what you were referring too....The Log i screen captured is for "Test Kit" Logs, whereas Trident keeps it own....Thanks again.
This seems to be making the rounds. One-off, or is this going to be every time?
Get Started | Modified Trident Reagent Replacement
Modified Trident Reagent Replacement: Preface If you have been directed to this page, due to the card found in your reagent kit, it is because the Trident will need a slightly modified reagent replacement method to achieve the most precise and accurate measurements. The entire reagent...www.neptunesystems.com
This is how i program my trident for my Calcium reactor
Fallback OFF
Set OFF
If Alkx3 < 9.30 Then ON
If Alkx3 > 9.35 Then OFF
It keeps my alk and cal very stable. My reactor is a Deltec Twin tech 1500. Its electronic controlled so i don't know if this will work with a regular reactor. Keeps my ph higher also as the reactor is not running all the time.
I started a new thread but figured I would post this here as well. Any help would be greatly appreciated.
Hello everyone! I have had my Trident up and running for a couple of months and love it. However, it always seems that my B and C reagents run out before my reagent A. I am running the minimum test of 4x a day. See below. It is showing Reagent C is low with about 30 more tests on Alkalinity(Reagent A). It will not allow me to run any manual Alk tests like this. I was thinking of just resetting the Reagent C but I don't want to run the risk of messing up the trident if this isn't recommended.