Trident programing with dos help

[Linkfalcon]

So my trident has been running for a week or 2 so and picked up a dos and finally got my 2 part all mixed and ready to go. So while waiting for the two part I was playing with the dos and Made it dose small amounts but now I want the dos to run Off what the trident see’s so I think I set it up right can y’all check it out thanks

 

[Linkfalcon]

I just does not seem the 3.2 ml and 7ml will Be enough

 

[SuncrestReef]

Have you read the Trident Controlled Dosing guide at Neptune's website?

https://www.neptunesystems.com/getstarted/trident/tridentdos/

 

[Hydrored]

It will not work with the setting you have there due to its current value compared to what you have it set at. Get your parameters to where you want them then use controlled dosing. Controlled dosing should also only be used when you already know what amount you should be dosing,

what is your DKH drop per day and current dose to keep it there after 24 hours?

 

[Linkfalcon]

thanks I was under the impression that I could just put it what I want it to then It will adjust

 

[Hydrored]

If you set it to 10 dkH and you are currently a 7 dkH then you are outside the control parameter.

Any reason you are trying to put your alk that high? What salt are you using?

Like anything trident is an aid, it does a great job of pegging alk but you need an understanding of the chemistry of your tank and what you’re trying to accomplish.