Triton Results Are In!

Well........

Does the tank seem OK?

I've never seen a tank with measurable antimony (Sb). I'll have to look around, but I have no idea what that is likely to imply. :D
 
Vanadium and nickel are high. High enough to be concerned.

Are you dosing a lot of trace elements?

Any metal parts in the water anywhere? RO/DI? Aquarium? New salt water?
 
Everything looks great. I'm not sure what is causing these levels? I've had the same auto top off for quite some time. Here's a pic of the tank. I think I may need to switch salts, because this is kind of concerning. I'm using Aquaforest's Probiotic blend.
MVIMG_20180605_121854.jpg



Well........

Does the tank seem OK?

I've never seen a tank with measurable antimony (Sb). I'll have to look around, but I have no idea what that is likely to imply. :D
 
O
Vanadium and nickel are high. High enough to be concerned.

Are you dosing a lot of trace elements?

Any metal parts in the water anywhere? RO/DI? Aquarium? New salt water?
Oh and sorry, I haven't started dosing yet been waiting for my Alk to drop to start dosing the 4 part Triton solution.
 
Vanadium and Nickel are common plating materials as well as being used to create mild steels. I'd check for rusty screws etc. But as Lithium is also high, also check your RO system and DI pods. Another source could be salt.

+1 on Randy's comments about Antimony. That's a new one on me!
 
FWIW, the lithium doesn't worry me and is elevated in many salt mixes. My result, using normal IO, was a tad above that reported here (mine was 353 ug/mL).
 
Vanadium and Nickel are common plating materials as well as being used to create mild steels. I'd check for rusty screws etc. But as Lithium is also high, also check your RO system and DI pods. Another source could be salt.

+1 on Randy's comments about Antimony. That's a new one on me!


What's strange is the tank is practically brand new, I don't know what could be rusting.
 
Vanadium and Nickel are common plating materials as well as being used to create mild steels. I'd check for rusty screws etc. But as Lithium is also high, also check your RO system and DI pods. Another source could be salt.

+1 on Randy's comments about Antimony. That's a new one on me!

I had been leaving my flipper blade underwater for quite some time, I wonder if the coating on this could have been corroding
 
What's strange is the tank is practically brand new, I don't know what could be rusting.

I would do some water changes and see what impact it has on the levels. If they stay constant, then I would suggest it’s salt or RO contamination.

If they increase then it’s likely corrosion or could still be contamination (did you use any screws to mount stuff that could have fallen in the sump?).

If it drops off and stays low, then it could be surface contamination such as plasticisers, stabilisers etc.

This presumed that you haven’t been dosing anything.

I had been leaving my flipper blade underwater for quite some time, I wonder if the coating on this could have been corroding

To put your mind at ease, Mine has been fine, it was in the tank for 3 years lol. You would see rust all over it
 
I would do some water changes and see what impact it has on the levels. If they stay constant, then I would suggest it’s salt or RO contamination.

If they increase then it’s likely corrosion or could still be contamination (did you use any screws to mount stuff that could have fallen in the sump?).

If it drops off and stays low, then it could be surface contamination such as plasticisers, stabilisers etc.

This presumed that you haven’t been dosing anything.



To put your mind at ease, Mine has been fine, it was in the tank for 3 years lol. You would see rust all over it

Thanks for the input, I definitely think I figured it out last night. I have a stainless steel temperature contorller probe that had been sitting in the water. I pulled it out last night and covered it in silicone. I think that's where the nickel and other elements are coming from. I'm gonna do some water changes and see if I can get the numbers down.
 
Thanks for the input, I definitely think I figured it out last night. I have a stainless steel temperature contorller probe that had been sitting in the water. I pulled it out last night and covered it in silicone. I think that's where the nickel and other elements are coming from. I'm gonna do some water changes and see if I can get the numbers down.

Hmmm.... I kind of doubtful on that. Surely it would be corroding and you would see this on the probe?
 
Hmmm.... I kind of doubtful on that. Surely it would be corroding and you would see this on the probe?

I was reading some articles that said the probe leaches things into the water, it's the only place that I can think the contamination would be coming from. Any other ideas?
 
I was reading some articles that said the probe leaches things into the water, it's the only place that I can think the contamination would be coming from. Any other ideas?

Yup, scroll up :)


I would do some water changes and see what impact it has on the levels. If they stay constant, then I would suggest it’s salt or RO contamination.

If they increase then it’s likely corrosion or could still be contamination (did you use any screws to mount stuff that could have fallen in the sump?).

If it drops off and stays low, then it could be surface contamination such as plasticisers, stabilisers etc.

This presumed that you haven’t been dosing anything.



To put your mind at ease, Mine has been fine, it was in the tank for 3 years lol. You would see rust all over it
 

TOP 10 Trending Threads

WHAT KIND OF REEFING DEAL ARE YOU HOPING TO PICK UP THIS BLACK FRIDAY?

  • A whole new aquarium or complete system

    Votes: 3 13.0%
  • Lighting, pumps, or other major equipment

    Votes: 3 13.0%
  • Controllers, testing, dosing, or automation gear

    Votes: 2 8.7%
  • Dry goods and restocks, like salt, media, or food

    Votes: 2 8.7%
  • Corals! Must...Have...CORALS!!!

    Votes: 5 21.7%
  • Fish or other livestock

    Votes: 1 4.3%
  • Rock, sand, or other aquascaping supplies

    Votes: 1 4.3%
  • I’m browsing, but don’t have a specific target

    Votes: 4 17.4%
  • I’m not shopping for reef deals this year

    Votes: 1 4.3%
  • Other (Post in the comments)

    Votes: 1 4.3%
Back
Top
Home
Post thread…
Market
What's new