Two skimmers
- Thread starter Jon M.
- Start date
- Tagged users None
- Joined
- Feb 18, 2019
- Messages
- 2,883
- Reaction score
- 6,222
- Location
- King George, Virginia
- What state or country do you live in
- Virginia
I would ask myself if my tank needs it, is my current skimmer large enough, and will I remove too much and harm my corals?
Clownfishy
Well-Known Member
- Joined
- Aug 17, 2017
- Messages
- 813
- Reaction score
- 378
- Location
- UK
- What state or country do you live in
- United Kingdom
I have often wondered about this but for from a resilience perspective. If our skimmer failed and I am working away, it would be quite an issue. However, running two would resolve this.
FlyPenFly
Well-Known Member
- Joined
- Feb 25, 2013
- Messages
- 743
- Reaction score
- 337
- Location
- San Diego, CA
- What state or country do you live in
- California
It usually won't work unless you have a massive system with high turn over or two very undersized skimmers. They seem to negate each other out in most cases and neither will build the foam to skim.
I've wanted to do this so I could run narrow and large neck sizes to pull out more different types of organics.
I've wanted to do this so I could run narrow and large neck sizes to pull out more different types of organics.
Running two skimmers can be really great. No skimmer is 100% efficient (more like 30%), so they don't work against each other. My usual advice is to run two skimmers when you can because even two average skimmers can outwork a single $2k Red Dragon powered skimmer, or the like, and it is not even close.
On one tank, I have a RO with the Sicce PSK pump and also a LifeReef- both pull tons of nasty skim mate. On another tank, I have a ASM G3 and an older ER 12-2 as well as a smaller RO with a Sicce PSK Pump and all three pull tons of junk.
Put them both on and see what happens. I don't think that anybody who has ever done it would tell you that they don't work well.
Ideally, running a uniform bubble size skimmer (needlewheel) and then a variable bubble size (downdraft, beckett or venturi) would compliment each other quite well, but even two of the same works very fine. Neck size, heights, bubble plates or cones really offer nothing and contact time and turbulence is what matters in most skimmers.
On one tank, I have a RO with the Sicce PSK pump and also a LifeReef- both pull tons of nasty skim mate. On another tank, I have a ASM G3 and an older ER 12-2 as well as a smaller RO with a Sicce PSK Pump and all three pull tons of junk.
Put them both on and see what happens. I don't think that anybody who has ever done it would tell you that they don't work well.
Ideally, running a uniform bubble size skimmer (needlewheel) and then a variable bubble size (downdraft, beckett or venturi) would compliment each other quite well, but even two of the same works very fine. Neck size, heights, bubble plates or cones really offer nothing and contact time and turbulence is what matters in most skimmers.
Similar threads
