UV Sterilizer

  • Thread starter Thread starter Wild1
  • Start date Start date
  • Tagged users Tagged users None

Wild1

Active Member
View Badges
Joined
Oct 9, 2008
Messages
438
Reaction score
323
Location
Roseland
What state or country do you live in
Florida
Rating - 0%
0   0   0
Has anyone here experience or used a add on UV sterilizer, that attaches to a RO/DI unit? Would they work for my 90 gal reef tank? TIA
 
Has anyone here experience or used a add on UV sterilizer, that attaches to a RO/DI unit? Would they work for my 90 gal reef tank? TIA
I’ve seen an add-on UV that hangs over the back of the tank, but you don’t connect it to an RO unit.
 
Sorry, but I can’t even picture that one in my mind.
 
I've seen home systems that have UV in conjunction with filters. It's going to depend on materials as there should be no metals that saltwater can corrode. Then on sizing and flow rates to achieve proper exposure levels and times.
 
Has anyone here experience or used a add on UV sterilizer, that attaches to a RO/DI unit? Would they work for my 90 gal reef tank? TIA

Why?

RO/DI water should come out clear as a bell without having any bacteria.

The flow could be too slow for a UV to not overheat and crack its internal glass tube.
 

Attachments

  • 6-stage-ro-di-uv-booster-pump-clear-housings-without-tank-19.jpeg
    6-stage-ro-di-uv-booster-pump-clear-housings-without-tank-19.jpeg
    274.6 KB · Views: 102
UV is designed to remove various things from your display tank. The water coming from your RO won't have any of these things.
 
Thanks for the photo, @choprjohn, that's definitely a new one on me. But for reasons others have stated, I would put it in the "gimmick" category. Think it through; is Ich or Marine Velvet coming out of your home's water supply? Or algae for that matter? Put the money into enough decent RO/DI filter-stages that are going to get you zero total dissolved solids (TDS) going INTO your tank, and save the UV sterilizer for the tank itself-- where all the 'crap-ola' will be. My thoughts, anyway. ;Happy
 
Last edited:
Yes I think Boston reefer is on the right track, usually used when you pull water from a known contaminated source. I have seen these installed in fishing lodges on lake of the woods when they pull water from the lake. No real need on a rodi but can make questionable water bacteriology safe.
 
Thanks for the photo, @choprjohn, that's definitely a new one on me. But for reasons others have stated, I would put it in the "gimmick" category. Think it through; is Ich or Marine Velvet coming out of your home's water supply? Or algae for that matter? Put the money into enough decent RO/DI filter-stages that are going to get you zero total dissolved solids (TDS) going INTO your tank, and save the UV sterilizer for the tank itself-- where all the 'crap-ola' will be. My thoughts, anyway. ;Happy
I have well water so, I'm not really sure what's in it. I'm really hoping the RO/DI will cover it, and thank you for your insight!
 
Yes I think Boston reefer is on the right track, usually used when you pull water from a known contaminated source. I have seen these installed in fishing lodges on lake of the woods when they pull water from the lake. No real need on a rodi but can make questionable water bacteriology safe.
You changed your picture! I was just kidding!
 

WHAT’S USUALLY THE FIRST CLUE THAT SOMETHING IS OFF IN YOUR REEF?

  • A fish’s behavior or appetite changes

    Votes: 10 14.5%
  • A coral looks different or stops opening normally

    Votes: 43 62.3%
  • Water clarity or surface appearance changes

    Votes: 10 14.5%
  • Equipment sounds or flow seem different

    Votes: 7 10.1%
  • A test result catches my attention

    Votes: 14 20.3%
  • Algae or other growth starts changing

    Votes: 14 20.3%
  • I usually notice when the problem is already obvious

    Votes: 3 4.3%
  • It depends on what’s going on

    Votes: 13 18.8%
  • Other (Post in the comments)

    Votes: 1 1.4%
Back
Top
Home
Post thread…
Market
What's new