... and can all be done in less than 15 min!
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
A couple of notes. I mentioned this in another post, but it likely pertains to a multitude of users. The Apex only connects to 2.4 ghz networks. If you're using an apple airport router, they create one network with two bands (2.4 ghz and 5 ghz). Typically you won't have any issues, even if your smart device connects to the 5 ghz band while your Apex connects to the 2.4 ghz band.
However, other routers create two bands broadcasted separately. Often you will see your network name (NETGEAR for conversation purposes) which is the 2.4 GHZ band and NETGEAR-5G with is the 5 GHZ band. During set-up, when your smart device disconnects from the Apex and back onto wi-fi, it must connect to the exact same network as the Apex. This means if you have multiple networks in your house, programmed to your smart device or your smart device is programmed onto a 5 GHZ network, it's likely it will connect to another network and you'll get a very frustrating connection error. To prevent this, tell your smart device to forget every network other than the one you are connecting your Apex too. That way, it's guaranteed during wireless set-up both the Apex and your smart device connect to the same network, saving you a connection error.
If you have encountered a connection error, it's quite likely your Apex will have exited wi-fi set-up (where the N on the base unit is blue) and you won't be able to log into apex.local. Pressing the tiny reset button on the base unit for 5 seconds will put it back into wi-fi setup mode and you can re-run the connection procedure, ensuring connection to the correct network.
Any smart product that uses a 2.4 GHZ band will have a similar issue during connection, so it's not exclusive to Apex. Anytime you're setting up a smart device, ensure that both your phone/computer/tablet connect to the exact same network the smart device is programmed too.
I've found that most smart devices (including Nest's line of stuff) all use 2.4 GHZ connections. Devices that stream video, such as Apple TV, etc, typically are 5G capable. You won't need to switch your mobile device to 2.4GHZ forever. Only while the Apex sets up. Once the Apex is set-up on your wi-fi network and linked to fusion, you can easily re-connect to a 5G network with no problem. It's only during the hand-off where Apex disconnects from a mobile device or computer and reaches out to a wi-fi network that your mobile device must be on the same wi-fi network as Apex. I think the reason for this is because just after set-up your PC is using apex.local to find the Apex and allow you to connect it with Fusion. If you're on another network, it can't find it and thus assumes the Apex didn't connect properly. I have had this same issue when installing Fishbit and multiple other smart tech products.Interesting... I have a couple routers including an Asus RT-AC68U 802.11ac that broadcasts two bands with different id's. For obvious reasons most of my wireless devices (laptops, phones, tablets, TV's) connect to 5G. A few old devices and guests get to use the slower connection. So it would seem if I were to ever upgrade to the new Apex unit and use wireless I would have to switch all my devices that I would use to talk to it to a slower connection or use hard wire as I do today. I'm sure wireless 2.4ghz g|n (gotta wonder which standard they use) is sufficient for Apex's needs but kind of surprised they would use an old standard in a new product. My current android phones are several years old and even they support 5g wireless connections.
If you wanted to monitor another tank simply purchase, for instance, the PM1 module, a temp probe, and a pH probe, and you simply connect them up and they will show up on your same dashboard.Question what if I have more than 1 aquarium and I want an apex to control each one how would that work? Would I need to have a different login and email addy for each controller and is that how fusion would see it?
Going the Apex jr route was my first thought but would it be connected to wifi so I could use my computer to monitor or would the jr need to work with a tablet to minitor?If you wanted to monitor another tank simply purchase, for instance, the PM1 module, a temp probe, and a pH probe, and you simply connect them up and they will show up on your same dashboard.
Or, you could get, for instance, and Apex Jr. and connect it to the second tank. Then you would have a dashboard for each and both tanks would be listed (in ApexFusion) in your list of tanks you can see or control.
Ok thx for the infoYou could connect the Jr. to a wifi bridge and use the display that comes with it on your main apex if you needed one. Everything could be monitored on wifi from your tablet then.
I can't connect. I get to where I have to go to apex.local and keep getting " the web page is not available". I tried the reset pin twice and still the same result. Don't easily get frustrated but I'm there now. Have tried this step for about an hour.I've found that most smart devices (including Nest's line of stuff) all use 2.4 GHZ connections. Devices that stream video, such as Apple TV, etc, typically are 5G capable. You won't need to switch your mobile device to 2.4GHZ forever. Only while the Apex sets up. Once the Apex is set-up on your wi-fi network and linked to fusion, you can easily re-connect to a 5G network with no problem. It's only during the hand-off where Apex disconnects from a mobile device or computer and reaches out to a wi-fi network that your mobile device must be on the same wi-fi network as Apex. I think the reason for this is because just after set-up your PC is using apex.local to find the Apex and allow you to connect it with Fusion. If you're on another network, it can't find it and thus assumes the Apex didn't connect properly. I have had this same issue when installing Fishbit and multiple other smart tech products.
The reason I keep posting this is because it's a very frustrating error. The Apex base unit shows it's connected (which essentially it is) but your computer shows a connection error and the Apex has left wi-fi set-up mode, likely leaving the user confused. It's such a simple thing to prevent, I want to ensure people are aware of it.