Viparspectra reducing/blackout whites?

[Thatdude156]

I am running my white channel at only 1% and you can’t even tell that the blues are on. Is there any way I can blackout some of the white lights? Like maybe just covering the lenses with electrical tape?

 

[outhouse]

no just turn up your blues to 10-20% hopefully you dont have a defective one. im running 2% and can see a little more yellowish then before with 1% which look smore like 20k, sometimes I prefer the whole 14k look

 

[clevebill71]

Watch on u tube telegram he mods the viperspectra u can bake the led board at 325 in your oven for 5 to 7 minutes pull off leds u want to replace with 3watt leds off Amazon either with 470 or 454 nm to get more blue and way less white

 

[clevebill71]

Here is the brand of leds

 

[clevebill71]

Cost 19.99 for 40

 

[clevebill71]

And u need to add thermoplaste to back of led when u put on the board and make sure to put positive with positive and negative with negative

 

[dhnguyen]

Watch on u tube telegram he mods the viperspectra u can bake the led board at 325 in your oven for 5 to 7 minutes pull off leds u want to replace with 3watt leds off Amazon either with 470 or 454 nm to get more blue and way less white

Why baking the LED board? The LED chips aren't all that hard to de-solder at all.

 

[clevebill71]

True didn’t know if he tried soldering before